in-lite ACE 12v LED Low Voltage Outdoor Post Lights Instruction Manual

in-lite ACE 12v LED Low Voltage Outdoor Post Lights

Product Information

The product is called ACE and it is a 12V lighting system. It comes with the following components:

• 1x ACE unit
• 1x 12V transformer
• 1x 12V in-lite cable
• 2x o14mm stones or gravel
• 1x o6mm stone or wood

Product Usage Instructions

1. Choose the installation option based on your preference:
   • Option 1: Soil/Gravel
   • Option 2: Stone/Wood
2. If you have chosen Option 1 (Soil/Gravel), proceed to step 14.
   If you have chosen Option 2 (Stone/Wood), continue with the next step.
3. Place the o14mm stones or gravel in the desired location.
4. Add the o6mm stone or wood on top of the o14mm stones or gravel.
5. Connect the in-lite 12V cable to the ACE unit.
6. Position the ACE unit in the desired location.
7. If using soil/gravel, make sure the ACE unit is placed securely and levelled.
8. Follow the instructions to connect the cable properly.
9. Turn on the transformer.
10. Make sure the ACE unit is receiving power.
11. If necessary, adjust the positioning of the ACE unit to achieve the desired lighting effect.
12. Ensure all connections are properly secured.
13. Turn on the ACE unit.
14. Enjoy your ACE lighting system!

PARTS

INSTALLATION

• Read through the manual for the transformer and cable before installing this fixture
• This product may only be used within the in-lite system. If components are used in the system that do not originate from in-lite, the warranty no longer applies
• Install the in-lite system components (fixtures, transformers, mini-connectors, Easy-Locks and cable connectors) so that they can easily be replaced
• Never use the in-lite low-voltage cable in combination with 100-240V. This is only suitable for use with the components of the in-lite 12 volt low-voltage system.