AA-2324081-5-2 VATTENSTEN
LED Lighting Strip Multicolour
Instruction Manual
AA-2324081-5-2 VATTENSTEN LED Lighting Strip Multicolour
CAUTION. FOR INDOOR USE ONLY!
WARNING!
Do not connect the chain to the supply while it is in the packing. The connecting cable can not be repaired or replaced. If the cable is damaged the entire fitting must be discarded.
Do not connect this chain electrically to another chain.
NON-REPLACEABLE BULB.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
ONLY USE A SAFETY TRANSFORMER WITH A SELV OUTPUT AS A SUPPLY FOR THE PRODUCT.
- Wipe the surface dry where the tape will be used with a clean and dry cloth.
- The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape.
- Please keep the unused fittings for future use.
The light strip can be cut at the marks. Make sure that the device is unpluged when you cut.
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
©Inter IKEA Systems B.V. 2021
2022-11-02
AA-2324081-5