IDEAL DN1040-3 Walkie Talkie Instructions

Home » IDEAL » IDEAL DN1040-3 Walkie Talkie Instructions

logo

IDEAL DN1040-3 Walkie Talkie

IDEAL-DN1040-3-Walkie-Talkie-PRODUCT

OVERVIEWIDEAL-DN1040-3-Walkie-Talkie-fig- (1) IDEAL-DN1040-3-Walkie-Talkie-fig- (2)

  • Insert batteries with the correct polarity as shown.
  • Remove exhausted batteries from tne toy.
  • Only batteries of the same or equivalent type as recommended are to be used.
  • Do not charge non-rechargeable batteries.
  • Rechargeable batteries are to be charged under adult supervision only.
  • Remove Rechargeable batteries before charging.
  • Do not short-circuit supply terminals.
  • Remove the battery from the product before extended storage.
  • Dispose of batteries according to local, state or federal laws.

Unscrew the battery cover to replace the battery.

HOW TO OPERATE

  1. Open battery cover and snap in (2) 9V batteries (Not included)
  2. Turn the “ON/OFF” button to “ON position to get product in a stand-by mode.
  3. Press the “PUSH TO TALK” button to transmit.
  4. Release the “PUSH TO TALK” button to receive.
  5. Best transmission and reception are achieved when the antenna is held in a vertical position.

CAUTION:

  1. Your transceiver set has been fully adjusted prior to shipment from the factory, When you insert/replace a battery please ensure not to touch the internal components.
  2. When the sound becomes weak, it is time to change to battery.
  3. Always turn the front “ON/OFF” button to the “OFF” position after playing. L 4.Keep product in dry and clean place.

MORSE CODEIDEAL-DN1040-3-Walkie-Talkie-fig- (3)

  • DOT-SHORT PRESS/DASH=LONG PRESS

POINT APPUI COURTIDEAL-DN1040-3-Walkie-Talkie-fig- (4)

  • PUNTO=PULSE CORTO

Leave a Comment