HYUNDAI 2023 Santa Fe Hybrid Owner’s Manual

2023 Santa Fe Hybrid

VOICE RECOGNITION TIPS (If equipped)

BLUETOOTH®

Command Dial <Phone #>

Example
“Dial 7-1-4-9-6-5-3-0-0-0”

Call <Name>

“Call John Smith”

Improving how you store your contacts can optimize your Bluetooth® Voice Recognition performance: · Use full names instead of short or single-syllable names
(“John or Dad”) · Avoid using special characters/emojis or abbreviations
(“Dr.”) when saving contacts

NAVIGATION
Command Find Address <House #, Street, City, State>
Find <POI Name>

Example “1-2-3-4-5 1st Street, Fountain Valley”
“Find McDonald’s®”

BLUE LINK
– Assist with creating MyHyundai.com account – Assist with Blue Link enrollment – Show Blue Link User’s Manual – Encourage customer to download the MyHyundai with Blue Link app
INTRODUCTION AND LOCATION OF THE SERVICE DEPARTMENT SET FIRST SERVICE APPOINTMENT REVIEW FACTORY RECOMMENDED MAINTENANCE SCHEDULE WAS THE CONDITION OF YOUR VEHICLE (AT DELIVERY) TO YOUR
SATISFACTION?

MAINTENANCE

Scheduled Maintenance Engine Oil and Filter Fuel Additive Tire Rotation
Air Cleaner Filter
Vacuum Hose Climate Control Air Filter (for Evaporator and Blower Unit) Air Conditioning Refrigerant Brake Hoses & Lines Drive Shafts & Boots Exhaust Pipe & Muffler Front Disc Brake/Pads, Calipers & Rotors Steering Gear Box, Linkage & Boots/ Lower Arm Ball Joint, Upper Arm Ball Joint Suspension Mounting Bolts Brake fluid Crankcase Ventilation Hose Fuel Filter Fuel Lines, Fuel Hoses and Connections Fuel Tank Air Filter Rear Disc Brake/Pads, Parking Brake Vapor Hose, Fuel Tank & Fuel Filler Cap Spark Plugs
Coolant
Automatic Transmission Fluid
*See Owner’s Manual for details.

Normal Usage

Replace

8,000 or 12 mos.

Add Perform

8,000 or 12 mos. 8,000

Inspect Replace

8,000 24,000

Inspect

Every 12 mos.

Replace

16,000 or 24 mos.

Inspect Inspect Inspect Inspect Inspect

8,000 8,000 8,000 15,000 8,000

Inspect

8,000

Inspect

8,000

Replace

48,000 or 48 mos.

Inspect

32,000

Inspect

32,000

Inspect

32,000

Inspect

32,000

Inspect

32,000

Inspect

32,000

Replace

100,000

1st Replace 80,000 or 120 mos. Add’l Replace 24,000 or 24 mos.

No check, No service required

Severe Usage*
Replace 5,000 or 6 mos. Inspect Same as Normal Perform 7,500 Inspect Same As Normal Replace More Frequently Inspect Same As Normal

Replace More Frequently

Inspect Inspect Inspect Inspect Inspect

Same As Normal Same As Normal 7,500 Same As Normal More Frequently

Inspect More Frequently

Inspect Replace Inspect Inspect Inspect Inspect Inspect Inspect Replace

Same As Normal Same As Normal Same As Normal Same As Normal Same As Normal Same As Normal More Frequently Same As Normal More Frequently

Replace Same As Normal

Replace 60,000

Looking For more detailed information? This Quick Reference Guide does not replace your vehicle’s Owner’s Manual. If you require additional information or are unsure of a specific issue,We recommend that you always refer to the vehicle’s Owner’s Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide is correct at the time of printing; however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment.

Sales Consultant

Date

Customer Email

Sales Manager

Date Date

NP150-72021-A (Rev 08/09/22) Printing 08/12/22

The Hyundai SANTA FE HYBRID
Quick Reference Guide

Roadside Assistance: 1-800-243-7766

Consumer Affairs: 1-800-633-5151

Sirius XM® Radio: 1-800-967-2346

Blue Link:

1-855-2BLUELINK (1-855-225-8354)

HYUNDAI VEHICLE OWNER PRIVACY POLICY
Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information.
You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Care Center at:
Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected]
Hyundai’s Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Center assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.

Headlights and fog lights
Page 07

Smart cruise control
Page 50

Wiper and washer
Page 08

Navigation
Pages 29

Instrument cluster
Pages 09
WARNING! To reduce the risk of serious injury to yourself and others, read and understand the important SAFETY INFORMATION in your Owner’s Manual.

Climate control
Pages 15
Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Hyundai. More detailed information about these features is available in your Owner’s Manual.

FEATURES AND CONTROLS

Climate control

Door locks

Fuel filler door

Headlights and foglights

Head-up display (HUD)

Homelink wireless control system

Hybrid Battery SOC (State of charge) gauge 13

Hybrid system modes

Instrument cluster

Instrument panel illumination

Interior lights

Power liftgate button

Remote & Smart key

Seat-Headrest adjustment

Seat-Rear seat folding

Seat-Seat adjustment (front)

Seat-Seat belt adjustment

Service Interval Reminder System

Sunroof

Trip computer

Vehicle power gauge

Warnings and indicators

Wiper and washer

Wiper blades

INFOTAINMENT

Android AutoTM

Android AutoTM wireless

Apple CarPlayTM

Apple CarPlayTM wireless

Audio mode

Blue link telematics system

Bluetooth audio quality tips

Bluetooth operational tips

Bluetooth phone pairing

Navigation

Steering wheel audio control

USB and Smartphone Charger

Voice recognition tips

Wireless cellular phone charging system 30

DRIVING

Blind-Spot Collision-Avoidance Assist (BCA)43

Digital Key Pairing

Drive mode integrated control system (4WD)48

Electric Parking Brake (EPB)

Forward Collision-Avoidance Assist (FCA) 42

Idle Stop and Go (ISG)

Lane Following Assist (LFA)

Lane Keeping Assist (LKA)

Leading vehicle departure alert

Near FIeld Communication (NFC)

Push button drive selector

Rear Cross-Traffic Collision-Avoidance Assist (RCCA) 44

Rear Occupant Alert (ROA)

Safe Exit Assist (SEA)

Smart Cruise Control (SCC)

Tire Pressure Monitoring System (TPMS) 49

*Some vehicles may not be equipped with all the listed features.

FEATURES AND CONTROLS

REMOTE & SMART KEY

Lock

Unlock

Liftgate Unlock/Open (Press and hold. Liftgate will open if equipped with Power Liftgate.)

Panic (press and hold)

Removing the mechanical key Slide and hold the release button A

to remove the mechanical key.

Driver’s door Lock / Unlock Smart key must be within 28~40in. from the outside door handle.
Press: Once – Unlock driver door Twice – Unlock all doors Third – Lock all doors
NOTE: User selectable option : Please see section 3 from Owner’s Manual for more details.
To unfold the mechanical key, press the release button on the remote.

Remote Smart Parking Assist button

Forward button

Backward button

When using the Remote Forward/ Backward function, the vehicle moves in the direction of the button while the button is pressed.

HYUNDAI

DOOR LOCKS Remote Key

Smart Key

FUEL FILLER DOOR

SANTA FE HYBRID

To access the key hole: If the smart key is not working properly, there is an alternative way to unlock the doors through the keyhole on the driver’s door. 1. Pull open the driver’s door handle 1 2. While holding the door handle open,
use mechanical key to release the clip 2 behind the door handle. 3. Remove the key hole cover 3 After removing the cover, turn the key clockwise to lock and counter clockwise to unlock the vehicle door. Once the door is unlocked it may be opened by pulling the handle.
To open fuel filler door: Turn engine off and unlock driver door. Push the fuel filler door in. Pull the fuel filler door outward to access the fuel tank cap. NOTE: The fuel filler door will lock when all doors are locked.
02

FEATURES AND CONTROLS
FRONT SEAT ADJUSTMENT (MANUAL) Forward/backward
A

Seat cushion height (for driver’s seat)
B

Seatback angle
C

Lumbar support
D

FRONT SEAT ADJUSTMENT (POWER) Forward / backward
A

Seat cushion height
A

Seatback angle
B

Lumbar support (for driver’s seat)
C
HYUNDAI

HEADREST ADJUSTMENT
To Raise Headrest: Pull headrest up. To Lower Headrest: Press lock button while pressing down on headrest.
SEAT BELT ADJUSTMENT (Front seat)
Pull up to raise.

REAR SEAT FOLDING
2nd row seat

Press button and push down to lower.

From cargo area

1
L

2ND R

SANTA FE HYBRID

To fold the rear seats from the cargo area, push the 2nd row seat back folding switch 1 located on both sides of the tailgate. L: Left seatback folding R: Right seatback folding
04

FEATURES AND CONTROLS
SUNROOF Power Sunshade

INTERIOR LIGHTS

Sliding the Sunroof Tilting the Sunroof 05

To open the power sunshade, pull the sunroof control switch 1 rearward to the first detent position.
To close the power sunshade
when the sunroof glass is closed, push the sunroof control switch 1 forward .
push the sunroof control switch backward to the second detent position. First the power sunshade will open and then the sunroof will open automatically.
push the sunroof control switch forward to the first detent position to close the sunroof only.
push the sunroof control switch forward to the second detent position to close both the sunroof and the power sunshade automatically.
Open push the sunroof control switch upward to tilt open the sunroof.
Close push it upward again to close the sunroof.
You can also push the sunroof control switch forward to close the sunroof.
push it forward to the second detent position to close both the sunroof and the power sunshade.
HYUNDAI

SANTA FE HYBRID

Front map lamp ( ) 1 Press the lens to turn the map lamp on or off. Front door lamp ( ) 2 Lights will turn on when any door is open. Front room lamp ( ) 3 Push the switch to turn the room lamp on.
06

FEATURES AND CONTROLS
07

POWER LIFTGATE BUTTON
When the ignition is on and the vehicle is in park, the power liftgate can be opened by using the console button on the dash. Before using the power liftgate, make sure it is selected in the User Setting modes in the LCD display.
To Activate: User Settings Door Power Liftgate
Adjusting Speed: The speed of the power liftgate can be adjusted in the User Settings mode in the LCD display. User Settings Door Power Liftgate Speed Normal/Fast
HEAD-UP DISPLAY (HUD)
The Head-Up Display is an optional feature that allows the driver to view information projected onto a transparent screen while driving. To Activate: Select “Head-Up Display on the User Settings mode on the instrument cluster LCD display and select “Enable Head-Up Display”
NOTE: If you wear polarizing-filter sunglasses, it’s difficult to read the Head Up Display information.

HYUNDAI

SANTA FE HYBRID

FEATURES AND CONTROLS

HEADLIGHTS AND FOG LIGHTS

Headlight Parking light

Auto light

All Lights Off

Headlight delay Headlights may stay on for 15 seconds after exiting and locking vehicle. Press remote lock button twice to turn headlights off.
See Owner’s Manual for more detail.

Turn signals and lane change signals Flashing headlights

PULL

OFF

High Beam/ High Beam Assist PUSH

NOTE: To turn off high beam, pull the lever towards you. High Beam Assist 1. Select AUTO position on stalk. 2. Push lever forward to engage Auto High beam. 3. Push lever forward again to disengage.
09

HYUNDAI

WIPER AND WASHER

WIPER BLADES

MIST – Single wipe
OFF – Off
INT – Intermittent wipe
LO – Normal wiper speed
HI – Fast wiper speed
NOTE: The rear wiper is controlled by the knob at the end of the wiper stalk. Turn the knob forward one stop for low wipe speed and two stops for high wipe speed.

This vehicle has a “hidden” wiper

design which means they cannot

be lifted in their bottom resting

position

NOTE: To prevent damage to the hood and wiper arms, the wiper arms should only be lifted when in the top wiping position.

Wiper Blade Removal
1. Within 20 seconds of turning off
the engine, lift and hold the wiper lever up to the MIST A position for about 2 seconds until the wipers move to the top wipe position.
2. At this position, you are able to lift the wipers off the windshield.
3. Gently put wipers back down onto windshield.
4. Turn the wipers to any ON position to return to resting position.

SANTA FE HYBRID

FEATURES AND CONTROLS
INSTRUMENT CLUSTER Type A
1
3
Type B
2
4
11

5 2

1 Power gauge

2 Speedometer

3 Battery SOC (State of Charge) gauge

4 Fuel gauge

5 Warning and indicator lights

6 LCD display (including Trip computer)

1 5
6
3

HYUNDAI

SANTA FE HYBRID

FEATURES AND CONTROLS

WARNINGS AND INDICATORS

Airbag warning light

Seat belt warning light

Parking brake & Brake fluid warning light

ABS warning light
Electric Power Steering (EPS) warning light
Engine coolant temperature warning light

Electronic Brake force Distribution (EBD) System warning light

Malfunction Indicator Lamp (MIL)

Charging system warning light

Engine oil pressure warning light

Low fuel level warning light

Low Tire Pressure Warning Light/ TPMS system malfunction light

Electronic Stability Control (ESC) indicator

Electronic Stability Control (ESC) OFF indicator

AWD warning light

Immobilizer indicator

Turn signal indicator

SPORT Mode indicator Light (if equipped)

Light ON indicator

AUTO HOLD indicator Light (if equipped)

High beam indicator
AWD LOCK indicator
Downhill Brake Control (DBC) indicator

Cruise ON indicator
High Beam Assist
Forward Safety Warning Light

Cruise SET indicator Electric Parking Brake (EPB) warning light (if equipped) EV mode indicator

TRIP COMPUTER

FUEL ECONOMY
·Average Fuel Economy
·Instant Fuel Economy

: VIEW MODE button for changing

modes.

: MOVE switch up and down to

change selected item.

: PUSH switch for setting or resetting

the selected item.

To change the trip mode as follows, press the MOVE button .

ACCUMULATED INFO
·Tripmeter ·Fuel Economy ·Timer

DRIVE INFO
·Tripmeter ·Fuel Economy ·Timer

Digital

Smart

speedometer Shift

HYUNDAI

INSTRUMENT PANEL ILLUMINATION
Move the control knob left or right to adjust the brightness.
SERVICE INTERVAL REMINDER SYSTEM
This system is designed to notify you of your next vehicle maintenance interval.
To Activate: Press the (Mode) button on steering wheel and navigate to user settings and select the following: Convenience > Service Interval > Enable Service Interval > Set/Adjust Interval.

SANTA FE HYBRID

FEATURES AND CONTROLS
Main indicators in cluster for Hybrid Vehicle
Ready indicator When the vehicle is ready to be driven, this indicator is illuminated. When the ready indicator goes off or blinks, we recommend the vehicle be checked by an authorized HYUNDAI dealer.
EV mode indicator This indicator illuminates when the vehicle is driven by the electric motor.
Service warning light If a problem with the hybrid vehicle control system occurs, the service warning light will illuminate. We recommend the vehicle be checked by an authorized HYUNDAI dealer.
VEHICLE POWER GAUGE
The power gauge indicates whether the current driving condition is fuel efficient or not.
CHARGE Shows that the energy made by the vehicle is being converted to electrical energy. (Regenerated energy)
ECO Shows that the vehicle is being driven in an Ecofriendly manner.
POWER Shows that the vehicle is exceeding the Ecofriendly range.
HYBRID BATTERY SOC (STATE OF CHARGE) GAUGE
This gauge indicates the remaining hybrid battery power. If the SOC is near the “L (Low)” level, the vehicle automatically operates the engine to charge the battery.

HYUNDAI

HYBRID SYSTEM MODES
Select the Hybrid Icon on the home screen. Energy Flow Mode This screen displays the energy flow from the engine and battery.
Fuel Economy Mode This screen displays average fuel economy. The graph shows fuel economy for the last 30 minutes and it is updated every 2 minutes and 30 seconds.

SANTA FE HYBRID

FEATURES AND CONTROLS
MANUAL CLIMATE CONTROL

3 1

3 2
7

DEFROSTING / DEFOGGING
1. Press the front windshield defroster button.
2. Set the temperature control to the warmest setting.

AIR INTAKE CONTROL

3. Set the fan speed to the medium setting.
NOTE: To reduce the tendency of the glass to fog up and also to improve visibility, keep the surface of the windshield clean by wiping it occasionally with glass cleaner and a clean cloth. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.

Recirculated air position (LED on)
Outside (fresh) air position (LED off)

HYUNDAI

1 Fan Speed Control Knob 2 Temperature Control Knob 3 Mode Selection Buttons 4 Front Windshield Defroster Button 5 Rear Window Defroster Button 6 A/C (Air Conditioning) Button 7 Air Intake Control Button

MODE SELECTION

REAR WINDOW DEFROSTER

Changes the direction of the air flow as following:
Face Level Bi-Level Floor Level Floor / Defrost Level
SANTA FE HYBRID

Press to activate/deactivate the rear defroster.
MAX A/C MODE
The MAX A/C automatically selects the A/C, recirculated air, and face level vents. This helps to cool the cabin down more quickly. Select normal A/C after initial cool down to resume fresh airflow and maintain efficiency.
18

FEATURES AND CONTROLS

AUTOMATIC CLIMATE CONTROL

CLIMATE

1 Driver’s Temperature Control Lever 2 Passenger’s Temperature Control Lever 3 AUTO (Automatic Control) Button 4 Front Windshield Defrost Button 5 Rear Window Defrost Button 6 Air Intake Control Button (Recirculated air) 7 Air Intake Control Button (Outside air) 8 SYNC Button 9 OFF Button 10 Air Conditioning Button 11 Fan Speed Control Knob 12 Mode Selection Button 13 Displaying Information on AVN

DEFOGGING / DEFROSTING
1. Press the front windshield defroster button.
2. Set the temperature to the warmest setting by pushing the temperature control lever up.
3. Set the fan speed to the medium setting.

SYSTEM OFF
Pressing the OFF button will place the system to the OFF mode.
· Climate control fan will turn off. · Outside (fresh) air position will
be selected. · Vented air will be at last set
temperature.

NOTE: To reduce the tendency of the glass fogging and also to improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.

HYUNDAI

HEATED STEERING WHEEL BUTTON
Press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate. Press the button again to turn the heated steering wheel off.

AUTOMATIC HEATING / AIR CONDITIONING

AIR INTAKE CONTROL

The modes, fan speeds, air intake and air conditioning will be controlled automatically by the temperature setting you select.
It is recommended to use the AUTO function with 72°F temperature set point for optimum comfort and efficiency. Adjust the temperature as desired

Recirculated air position (LED on)
Outside (fresh) air position (LED on)

MODE SELECTION

Changes the direction of the air flow as following:

SANTA FE HYBRID

FEATURES AND CONTROLS
HOMELINK WIRELESS CONTROL SYSTEM

1 23

4 56

1. Press and release 1 , 2 or 3 button.
· If the indicator 7 is turned ON in Orange, go to Step 3 (programming mode) · If the indicator 7 is continuously turned ON or flashes in Green rapidly several times, go to Step 2 (erasing mode)
2. Press and hold the button you wish to program for approximately 15- 25 seconds until the LED flashes in Orange for several times.
3. Hold the Garage Door Opener Original Transmitter near the HomeLink Mirror.
4. Press the Original Transmitter button until the indicator 7 is turned continuously ON or flashes in Green for approximately 10 seconds and it indicates the programing is completed.
NOTE: If the indicator 7 flashes in Green continuously, but if the garage door opener does not operate, please continue to follow Rolling Code Programming steps below.

Two Way Communication Some new garage door openers come equipped with a two-way communication feature. If your garage door opener has this feature, please also continue to follow the Rolling Code Programming steps below. For more information and programming tips on two-way communication please visit www. homelink.com/compatible/two-
waycommunication or call (800)-355-3515.

Indicator 4 & 6 : Flashes in orange “Closing” & “Opening” Solid Green “Closed” & “Opened”

NOTE: If your garage door opener has Two-Way Communication functionality, it is possible for HomeLink to stop functioning the garage door shortly after initial programming, if the Two-Way Communication Programming wasn’t properly completed. If you experience this, completing the “Programming a New HomeLink Button” and “TwoWay Communication Programming” will restore door operation.

HYUNDAI

Rolling Code Programming ·You may need a ladder to access your garage door opener. ·You may need help from a second person. ·Be prepared some of the steps are time sensitive. 1. Firmly press and release the “Learn”, Smart”, or ” Program” button
of garage door opener on the ceiling while the indicator 7 flashes in Green. Once the button is pressed, you have approximately 30 seconds to initiate the next step.
2. Return to the vehicle and firmly press the HomeLink button, hold for two seconds and release the button up to three times. Do not press the HomeLink button rapidly. At this point programming is complete and your device should operate.
For more detailed information, please refer to your Owner’s manual or visit www.homelink.com or call 800-355-3515

SANTA FE HYBRID

INFOTAINMENT

BLUETOOTH PHONE PAIRING

With 3.8″ Audio

1. Press the PHONE button on the steering

AUDIO

wheel.

PHONE

FAV

2. Search for car name on the Bluetooth list

1 RPT

2 SHFL

4 BACK

from your mobile phone and pair device.

3. Input the passkey. (Initial passkey is 0000)

4. Bluetooth becomes connected.

STEERING WHEEL AUDIO CONTROL

1 VOLUME Raises or lowers the speaker volume. Press to Mute.
2 SEEK / PRESET Changes the station.
3 MODE Changes the audio source.

With Navigation
RADIO
MEDIA SEEK TRACK

1. Press the PHONE button in the head unit or button in the steering wheel remote
controller.
2. Press <YES> to search for Bluetooth phones.
3. Pair your car after your mobile phone detects the Bluetooth device.
4. Enter the passkey or accept the authorization popup. (The default passkey is 0000.)
5. Connect Bluetooth.
NOTE: Vehicle must be parked to complete the pairing process.

HYUNDAI

SANTA FE HYBRID

INFOTAINMENT

BLUETOOTH OPERATIONAL TIPS

In the following situations you or the other party may have difficulty hearing each other:
1. Keep the Bluetooth volume low. High level volume may result in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when the air conditioning fan is at the max speed.

Steering wheel bluetooth control

1 VOICE RECOGNITION Activates the voice recognition.
2 CALL Places and transfers calls.
3 END Ends calls or cancels functions.

To Answer a Call: · Press the button on the steering wheel.
To Reject a Call: · Press the button on the steering wheel.
To Adjust Ring Volume: · Use the VOLUME buttons on the steering wheel.
To Transfer a Call to the handset (private mode): · Press and hold the button on the steering wheel until the audio system transfers a call to the phone.
To Finish a Call: · Press the button on the steering wheel.
Making a call using voice recognition: The menu tree identifies available voice recognition Bluetooth® functions. Calling by Name:
1. Press the button. 2. Say the following command:
· “Call <John>”: Connects the call to John. · “Call <John> <on Mobile / at Work / at Home > : Connects the call
to John’s Mobile, Home, or at Work phone number.
Dialing by Number: 1. Press the button. 2. Say “Dial Number”. 3. Say the desired phone number. For the complete list of commands, please refer to your Owner’s Manual.

HYUNDAI

BLUETOOTH AUDIO QUALITY TIPS
Ensure Bluetooth device volume is set to 100% for optimal audio quality. To adjust volume to your preference, utilize the head unit knob or steering wheel control. When placing a call, reduce the volume of the head unit if distortion or echoing is present.

VOICE RECOGNITION TIPS

Your vehicle is equipped with a Voice Recognition technology which allows drivers to operate their phones without having to take their eyes off of the road to minimize distractions.

Voice recognition performance may be affected if driving with windows and sunroof open; when the heating-cooling system is on; when passing in a tunnel or when driving on rugged and uneven roads.

Quick reference on using voice commands:

To start a voice command, press the button, the following commands are available:

Command
More Help Help Calls <Name> Dial <Number> Phone
Contacts (Call by Name) Dial Number

Function
Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode. Calls <Name> saved in Contacts. Ex) Call “John” Call can be made by dialing the spoken numbers. Ex) Call “123” Provides guidance on Phone related commands. After saying this command, say “Call History”, “Contacts” to execute the corresponding functions. Displays the Contacts screen. After saying this command, say the name of a contact saved in the Contacts to automatically connect a call. Displays the Dial number screen. After saying this command, you can say the number which you want to call.

SANTA FE HYBRID

INFOTAINMENT
BLUE LINK TELEMATICS SYSTEM
Press the button for access to the voice-response menu of services. You can say: – “Service Link” to schedule a service appointment. – “Roadside Assistance” for roadside services. – “Blue Link Account Assistance” for help with your Blue Link subscription. – Press the button for SOS Emergency Assistance. – Refer to your Blue Link User’s Manual for detailed information on system
operation. – For immediate assistance with subscription services, please call
1-855-2BLUELINK (1-855-225-8354). NOTE: *Remote Start is only available for Push Button Start equipped vehicles with an Automatic Transmission or a Dual Clutch Transmission (DCT).

Remote Start Remote Start
You can download the Blue Link mobile app to your compatible smart phone from the following sites: · iPhone® — Apple® App Store · Android® — Google Play
Remote Start enables you to remotely start your vehicle from virtually anywhere. User can also enable climate control Remotely, and for some models even turn on Rear-window defroster remotely, ensuring a warm or cool car is ready to go when you are. · To use this feature, you must have a Blue Link Personal
Identification Number (PIN). To create or change your PIN, log on to www.MyHyundai.com.
Remember: · Remote Start with Climate Control will automatically shut off after 10 minutes or after selected engine timer runs out. · While this feature is active, the parking lights will blink until vehicle is turned off or when vehicle is in operation. · To continue operation of the vehicle, the proximity key must be inside the vehicle with the driver prior to pressing the brake and being able to move the gearshift from the P (Park) position.

HYUNDAI

SANTA FE HYBRID

INFOTAINMENT

Preconditions: · Ignition is OFF · Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock) · Gearshift level is in the P (Park) position · Brake pedal is not depressed · Engine hood is securely closed · All the doors are closed and locked · The tailgate or trunk lid is closed · The security/panic system is not activated · The battery power is not low · Vehicle is located in an open area · It has been less than 4 days since last vehicle ignition off · Vehicle located in area with good cell reception
Remote Start will terminate: · After 10 minutes or after selected engine timer runs out. · Brake is pressed without proximity key inside vehicle · Alarm is triggered without proximity key inside vehicle · Door/trunk is opened from inside the vehicle
Notice: Laws in some communities may restrict the use of the features that remotely start the engine. For example, some laws may require a person using the remote start feature to have the vehicle in view when doing so or limit the length of time a vehicle engine may idle. Please check local and state regulations for any requirements and restrictions on remote starting of vehicles and engine idling time.
WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when parking the vehicle.

HYUNDAI

AUDIO MODE

Press POWER button A to turn radio on.
· TUNING/LISTENING TO CHANNELS
1. Press the RADIO button B . 2. Press the search backward button SEEK C or the search forward
button TRACK to desired channel.
NOTE: A clear view of the southern sky is recommended to ensure SXM® radio reception. · SETTING PRESET MEMORY BUTTONS (FM/AM/SXM® )
Press and hold any preset button D until an audible beep is heard to store current channel.
· ADJUSTING THE SOUND CONTROL
1. Press SETUP button . 2. Select Sound button on screen. 3. Touch on-screen arrows to adjust
desired setting.
NOTE: 1. Users can set the volume level of each source (FM, AM, SXM, USB,
BT and etc.) individually by adjusting the “A” knob.
2. When the volume of a source is adjusted to the desired level, it will be automatically saved at that setting. Thus, when the user changes source and reverts back, the volume will be set at the last desired level.

SANTA FE HYBRID

INFOTAINMENT

NAVIGATION

Basic features on the map screen

1 13
2

1 Move to the Home Screen

8 Touch to scroll the map

2 Change the map view mode 9 Start Guidance

3 Voice Guidance On/Off

10 Route Options

4 Zoom in the map

11 Save frequently used address to

5 Set the zoom level automatically address book

according to the guidance

12 Find a POI (Point of Interest)

6 Zoom out the map

around the current position

7 Quick and easy selection of a 13 View the vehicle’s current position

destination and options

on the map screen

Destination search screen

Press [NAV] button in the navigation head unit, and finds a destination by using the [Destination] menu.

1 Address : Set destination by address search.
2 Previous destinations : Select from previously inputted addresses and POIs.
3 Online Search: Runs online search.
4 POI categories : Select the desired item in the subcategories.
5 Gas stations : Select the desired destinations among the searched gas stations.

6 Restaurants : Select the desired destination among the searched restaurants.
7 Emergency : Select the desired destination among the searched emergency facilities.
8 Address Book : Search the destination with the address book.
9 Coordinates : You can find a destination by entering the coordinates of latitude and longitude.

HYUNDAI

WIRELESS CELLULAR PHONE CHARGING SYSTEM (if equipped)
There is a wireless cellular phone charging pad in the center console. The system operates with all doors closed and the ignition in the ON position.
The wireless charging must be enabled in the User Settings prior to using.

Using the Wireless Phone Charging System
1. Place a compatible (Qi enabled) device in the charging slot in the center console with the battery facing the driver.
2. The wireless charging symbol will be shown on the upper right corner of the audio display and the Wireless charging LED will illuminate in the center console.
NOTE: · Wireless charging systems are less efficient than conventional charging using a cable. As a result, higher device operating temperatures may be experienced during use and, thick phone cases may negatively affect charging speed and temperature.
· Do not place credit cards or other magnetic media on the pad as they could be damaged by the magnetic field. In addition, avoid placing any metallic objects near the pad as they may impede charging performance.
USB AND SMARTPHONE CHARGER
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The electrical devices can be recharged when the Engine Start/ Stop button is in the ACC or ON (or START) position.

SANTA FE HYBRID

INFOTAINMENT
ANDROID AUTO TM
REQUIREMENTS: – USB cable – OS AndroidTM 5.0 or higher – Compatible Android Phone – Data and wireless plan for applicable features
BEFORE YOU BEGIN: – Android Auto features may operate differently than on your phone. – Message and data charges may apply when using Android Auto. – Android Auto relies on the performance of your phone. If you
experience performance issues: – Close all apps and then restart them – Disconnect and then reconnect your phone – Using the USB cable that was provided with your phone is recommended.
ANDROID AUTO SUPPORT
https://support.google.com/androidauto/

HYUNDAI

PHONE SETUP
Turn on Bluetooth® on your phone and connect the micro USB cable to your phone and the USB port on the vehicle.
Phone will prompt you to download the Android Auto app and update other needed apps (e.g. Google MapsTM, Google Play MusicTM, Google NowTM).
NOTE: Vehicle must be parked. – Location mode setting should be set to High accuracy. – Car and phone setup should be completed in one sitting. If phone
setup needs to be resumed, recommend to Force Stop the Android Auto app on the Phone then reopen the app and accept the Disclaimer notifications.
CAR SETUP
1. Press the SETUP button on the screen.
2. Touch the “Device Connections” icon on screen.
3. Select Phone Projection Settings. 4. Select Android Auto. 5. Select Enable Android Auto 6. Connect your Android phone to the vehicle USB port. Agree to the
notification and disclaimers on your phone then the “Android Auto” icon will appear confirming the setup. For more detailed information on how to operate Android Auto, please refer to your display audio or navigation manual.
For additional Android Auto support, please refer to the Android Auto Support Website https://support.google.com/androidauto/
Android Auto, Google Play, Android, and other marks are trademarks of Google Inc.

SANTA FE HYBRID

INFOTAINMENT
ANDROID AUTO TM WIRELESS (IF EQUIPPED)
REQUIREMENTS: – Compatible Android Phone that supports Android Auto Wireless – Data and wireless plan for applicable features – Bluetooth & Wifi must be enabled
BEFORE YOU BEGIN: – Android Auto can be set up and utilized with both the Wi-Fi and
USB Chord – Refer to previous page for more details
PHONE SETUP
– Turn on Bluetooth and Wifi on your phone – Download Android Auto App, and update other needed apps (e.g.
Google Maps, Google Play Music, Google Now)

CAR SETUP

Activate Wireless Connectivity On the Home Screen, select the following: All Menus > Setup > Wi-Fi > Use Wi-fi Connection
Pairing Smartphone With Phone Projection On the Home Screen, select the following: All Menus > Setup > Device Connections > Phone Projection > Add New

HYUNDAI

ON YOUR SMARTPHONE
– Activate Bluetooth and Wifi – Search for your vehicle on Bluetooth device list – Select your Vehicle – Confirm Bluetooth passkeys match the touch
screen display – Read and accept prompts from the touch
screen display NOTE: If the smartphone has been added to the system’s Bluetooth device list, first delete the smartphone from the Bluetooth list, and add it to the phone projection list. Smartphone will also be registered to Bluetooth after registering to Phone Projection.
Connect to Android Auto On the Home Screen, select the following: All Menus > Android Auto

– REMINDERS: · Android AutoTM compatibility requirements for connection:
Bluelink with Navigation (USB cable connection only) : OS AndroidTM 5.0 or higher, phone manufacturer’s USB cable and data plan with applicable feature(s)

Standard Audio System-Value (USB cable & wireless connection)

: (USB cable connection): OS AndroidTM 5.0 or higher, phone manufacturer’s USB cable and data plan with applicable feature(s)
: (Wireless connection): OS AndroidTM 9.0 or higher with data plan for applicable feature(s)

SANTA FE HYBRID

INFOTAINMENT
APPLE CARPLAY TM
REQUIREMENTS – Apple Lightning® cable (Apple-certified cable) – iOS software 8.0 and higher – iPhone® 5 or above – Data and wireless plan for applicable features
BEFORE YOU BEGIN – Apple® CarPlay features may operate differently than on your phone. – Message and data charges may apply when using Apple CarPlay. – Apple CarPlay relies on the performance of your phone. If you
experience performance issues: – Close all apps and then restart them – Disconnect and then reconnect your phone – Using the Apple Lightning cable that was provided with your phone is recommended.
PHONE SETUP
On your phone, go to Settings > General > CarPlay to allow CarPlay access. On your phone, go to Settings > Siri and ensure Siri is turned ON.

CAR SETUP 1. Press the SETUP button. 2. Touch the “Device Connections” icon on the screen. 3. Select Phone Projection Settings. 4. Select Apple CarPlay. 5. Touch Enable Apple CarPlay. 6. Connect your Apple iPhone to the vehicle USB port then touch `OK’
when the pop-up message appears. The Apple CarPlay icon will now appear on the vehicle Home screen confirming the setup.
Apple CarPlay, Apple, and other marks are trademarks of Apple Inc.

HYUNDAI

SANTA FE HYBRID

INFOTAINMENT

CarPlay Home Screen

MODE

3
MODE

1 10
1 HOME ICON 2 WIRELESS CONNECTIVTY 3 CELLULAR SIGNAL 4 PHONE TIME 5 PHONE 6 APPLE MUSICTM

7 APPLE MAPS 8 MESSAGES 9 3RD PARTY APPS 10 SCREEN PAGE INDICATOR 11 EXIT TO HYUNDAI 12 CURRENT CARPLAY AUDIO PLAYING 13 VOICE RECOGNITION TIPS

SIRI
Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by: 1. Touch and holding the HOME icon 1 on the CarPlay screen or 2. Press and HOLD the steering wheel VOICE RECOGNITION 13 button. Note: Ensure Siri feature is set to ON in your phone (Go to Settings > General > Siri). 3. Say any of the following commands;
·”Text <John Smith> `Call you later’” to send a text message. ·”Read text messages” to read available text message. ·”Call <John Smith>” to make a phone call. ·”Find <POI/Destination>” to locate a POI/Destination.

PHONE Touch the PHONE 5 icon to access the Phone screen. Siri will automatically ask `Who would you like to call’ when the PHONE 5 icon is selected.
NOTE:Phone call sound quality is dependent on the wired connection. Using the Lightning cable that came with the phone is recommended.
APPLE MUSIC Touch the APPLE MUSIC 6 icon to access the Apple Music screen.
APPLE MAPS Touch the APPLE MAPS 7 icon to access the Apple Map screen.
MESSAGES Touch the MESSAGES 8 icon to access the Message screen. Siri will automatically ask `To hear unread messages or create a new one’ when the MESSAGE icon is selected.
3rd PARTY APPS Supported CarPlay apps that are downloaded on your phone will appear on the CarPlay screen. Touch the apps icons to access those supported apps.
NOTE: A list of the supported CarPlay supported apps can be found at https://www.apple.com/ios/carplay/
Ensure phone has latest version of the 3rd Party Apps.

HYUNDAI

SANTA FE HYBRID

INFOTAINMENT

APPLE CARPLAY TM WIRELESS (IF EQUIPPED)

REQUIREMENTS:
– iOS software 10 and higher
– Compatible iOS Phone that supports Wireless Carplay
– Data and Wireless plan for applicable features

SANTA FE

BEFORE YOU BEGIN:
– Carplay is only available via Wi-Fi Phone Projection

PHONE SETUP
1. On your phone, go to Settings > General > Carplay to allow Carplay access.
2. On your phone, go to Settings > Siri, Wi-Fi and Bluetooth and ensure they are turned ON.

CAR SETUP

Activate Wireless Connectivity
On the Home Screen, select the following:
All Menus > Setup > Wi-Fi > Use Wi-fi Connection

Pairing Smartphone With Phone Projection
On the Home Screen, select the following:
All Menus > Setup > Device Connections > Phone Projection > Add New

“SANTA FE”?

NOTE: If the smartphone has been added to the system’s Bluetooth device list, first delete the smartphone from the Bluetooth list, and add it to the phone projection list. Smartphone will also be registered to Bluetooth after registering to Phone Projection.
Connect to CarPlay
On the Home Screen, select the following: All Menus > CarPlay

– REMINDERS:
· Apple CarPlay® compatibility requirements for connection:
Bluelink link with Navigation (USB cable connection only): iOS software 8.0 and higher with data plan for applicable feature(s)
Standard Audio System-Value (Wireless connection only): iOS software 10.0 and higher with data plan for applicable feature(s)

HYUNDAI

SANTA FE HYBRID

DRIVING

LANE KEEPING ASSIST (LKA)

NOTE: LKA Settings can be adjusted between warning only and Active Assist in the User Settings page of the instrument cluster or AVN Screen under Driving Assist.

Lane Keeping Assist is designed to help detect lane markings (or road edges) while driving over a certain speed. The system will warn the driver if the vehicle leaves the lane without using the turn signal, or will automatically assist the driver’s steering to help prevent the vehicle from departing the lane.
With the engine on, press and hold the Lane Safety button located on the instrument panel to turn on Lane Keeping Assist. The white indicator light will illuminate on the cluster. Press and hold the button again to turn off the system.
LKAS operates only when the vehicle speed is above 40 mph and when the LKAS indicator is green displayed in the instrument cluster. LKAS will not operate properly if the lane line is not clear, sharp bend in the road, or in heavy fog. Refer to the Owner’s Manual for more detailed information.

FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message and an audible warning, and if necessary, apply emergency braking.
To operate FCA, select the Forward Safety sub menu under User Settings in the LCD cluster or infotainment system. Please refer to your Owner’s Manual for further information.
Active Assist: FCA will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk.
Warning Only: FCA will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted.
Off: FCA will turn off. The warning light will illuminate on the cluster.

HYUNDAI

SANTA FE HYBRID

DRIVING
BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA)
Blind-Spot Collision-Avoidance Assist (BCA) system is designed to help detect and monitor approaching vehicles in the driver’s blind spot area and warn the driver of a possible collision with a warning message and audible warning. In addition, if there is a risk of collision when changing lanes or driving forward out of a parking space, the system will help avoid a collision by applying the brake.
BCA Settings can be adjusted between warning only and Active Assist in the User Settings page of the instrument cluster or AVN Screen under Driving Assist.

LANE FOLLOWING ASSIST (LFA)

Lane Following Assist detects lane markers on the road using the front view camera mounted on the front windshield. LFA helps to assist the driver steering to help keep the vehicle centered in the lane.
To enable LFA while driving, press the Lane Driving Assist button on the steering wheel. Operating conditions When LFA is activated, the indicator ( ) on the cluster will illuminate. T. he color of the indicator will change depending on the condition of LFA – Green: When LFA assist the steering – White: When LFA can not assist the steering

HYUNDAI

REAR CROSS-TRAFFIC COLLISION-AVOIDANCE ASSIST (RCCA)
The RCCA system uses radar sensors to monitor approaching vehicles to the left and right while your vehicle is in reverse. If the risk of collision is detected while the RCCW is generated, brake is controlled. The instrument cluster will inform the driver of the brake control. If the rear view monitor system is in activation, a message will also appear on the audio or AVN screen.
Activate/Deactivate
Select the following items on the instrument cluster in order:
1. Select User Settings
2. Select Driver Assistance
3. Select Blind Spot Safety 4. Select Rear Cross Traffic Safety
Warning Volume
With the engine on, select `Driver Assistance Warning Volume’ from the Settings menu to change the Warning Volume to `High’, `Medium’ or `Low’ for LKA, BCA and LFA systems.

SANTA FE HYBRID

DRIVING
SAFE EXIT ASSIST (SEA)
The Safe Exit Assist system helps prevent passengers from opening the door when a vehicle is approaching from the rear area. After the vehicle stops and an approaching vehicle from the rear area is detected, the rear door does not open from the inside handle. A “check surroundings then try again” warning message will appear on the cluster and a warning sound will go off.
When an approaching vehicle from the rear is detected and the door is already opened, a “watch for traffic” warning message appears and a warning sound will go off.
Activate/Deactivate Select the following items on the instrument cluster in order: 1. Select user settings mode in the
cluster LCD display 2. Select Driver Assistance 3. Select Blind-Spot Safety 4. Select Safe Exit Assistance

REAR OCCUPANT ALERT (ROA)

The Rear Occupant Alert system helps prevent exiting the vehicle with the rear passengers left in the vehicle.

1st Alert

When you open the front door after

opening and closing the rear door and

the engine is off, a “check rear seats”

warning message appears.

Activate/Deactivate
Select the following items on the instrument cluster in order:
1. Select User Settings on the cluster LCD display
2. Select Convenience
3. Select Rear Seat Alert

NOTE: If you press the child safety switch located on the driver door within 10 seconds after the warning message appears, the driver acknowledges the rear status and the child safety lock is canceled.

NOTE: The overhead sensor is located above the rear
passenger seats.

HYUNDAI

SANTA FE HYBRID

DRIVING

IDLE STOP AND GO (ISG)

The ISG system will automatically

shut off the engine when the vehicle

is at a standstill (i.e. red stop light, stop sign, and traffic jam) to increase

vehicle’s fuel economy. The auto

stop indicator A will illuminate in

Green on the instrument cluster

when activated. To restart the engine

in auto stop mode, release the brake

pedal and press on the accelerator.

The auto stop indicator goes OFF on

the instrument cluster once the

engine is restarted.

Prerequisite for activation: -The driver’s seatbelt is fastened.

-The driver’s door and the hood are closed.

-The brake vacuum pressure is adequate. -The battery is sufficiently charged.

-The outside temperature is between 14°F and 95°F (-10°C and 35°C).

-The engine coolant temperature is

not too low.

-The system is not in the diagnostic mode.

NOTE: The engine will not shut off if the prerequisites are not satisfied. In that case, the Auto Stop indicator will illuminate in yellow on the instrustment cluster.

To deactivate Press the ISG OFF B button, indicator illuminates.
To activate Press the ISG OFF B button , indicator turns OFF.
NOTE: If ISG is deactivated, it will be turned on again with key cycle.

HYUNDAI

DRIVE MODE INTEGRATED CONTROL SYSTEM (4WD)

The mode changes, as below, whenever the DRIVE MODE button is pressed. An indicator will illuminate on the instrument cluster when the vehicle is in sport mode or smart mode. When the vehicle is in comfort mode, it is not displayed on the instrument cluster.

ECO

SPORT

ECO

SPORT

S SMART

LOCK

SNOW

SMART

SNOW

ECO mode: ECO mode helps improve fuel efficiency for eco-friendly driving. Fuel efficiency varies according to the driver’s driving habits and road condition.
SPORT mode: Sport mode manages the driving dynamics by automatically adjusting the steering effort, and the engine and transmission control logic for enhanced driving performance. When sport mode is activated, the engine RPM will be a little higher than normal.
SMART mode:
Smart mode selects the proper driving mode between comfort and sport by judging the driver’s driving habits.
SNOW mode: In Snow mode, the engine’s driving power is properly distributed to the wheels, to help start the vehicle stably on slippery roads or keep tires from slipping. Use this mode when driving on slippery roads.
NOTE: Whenever the engine is restarted, the drive mode will revert back to the default comfort mode

SANTA FE HYBRID

DRIVING

PUSH BUTTON DRIVE SELECTOR

P (Park) R (Reverse) N (Neutral) D (Drive)

P (Park)
Always come to a complete stop before shifting into P (Park). To shift from P (Park), you must depress firmly on the brake pedal and make sure your foot is off the accelerator pedal. The gear must be in P (Park) before turning the engine off.

Shift-lock system
For your safety, the automatic transmission has a shift-lock system which prevents shifting the gear from P (Park) or N (Neutral) to R (Reverse) or D (Drive) unless the brake pedal is depressed. To shift the gear from P (Park) or N (Neutral) to R (Reverse) or D (Drive):
1. Depress and hold the brake pedal. 2. Start the engine or place the ignition switch in the ON position. 3. Depress the brake pedal and push the R (Reverse) or D (Drive) button. CAUTION: The surface of the drive selector can get very hot when exposed to direct sunlight, be cautious when shifting gears.

HYUNDAI

SANTA FE HYBRID

DRIVING
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Low Tire Pressure Indicator / TPMS Malfunction Indicator
Low Tire Pressure / Tire Pressure Monitor / TPMS Malfunction Display (shown on the cluster LCD display)

LOW TIRE PRESSURE INDICATOR Illuminates if one or more of your tires are significantly under-inflated.
TPMS MALFUNCTION INDICATOR Blinks for approximately one minute, then remains illuminated when there is a malfunction with the TPMS. Inspect all tires and adjust the tire pressure to specification. If the lamp remains illuminated, we recommend the vehicle be checked by an authorized HYUNDAI dealer.
LOW TIRE PRESSURE / TIRE PRESSURE MONITOR / TPMS MALFUNCTION DISPLAY(LCD DISPLAY)
Select the Driving Assist mode by pressing the mode button on the steering wheel to display tire pressure.
Tire pressures will display after driving a short distance. If a tire pressure drops lower than predetermined specification, the Low Tire Pressure Indicator will illuminate and the cluster display will indicate tire(s) requiring air.
NOTE: Environmental factors can affect the tire pressure. The two main environmental factors are ambient air temperature and elevation. Colder ambient air will reduce tire pressure, while hotter ambient air will increase tire pressure. High elevation may also increase tire pressure.

HYUNDAI

SMART CRUISE CONTROL (SCC)

Smart Cruise Control allows you to

program the vehicle to maintain a

constant speed without holding the

accelerator pedal. while maintaining

a consistent distance with the

vehicle ahead.

2 1 To turn On/Off Smart Cruise Control.

3
2 Toggle switch UP to Set or Increase

the cruise control speed.

3 Toggle switch DOWN to Set or Decrease the cruise control speed.

4 To Pause or resume Smart Cruise Control.

Setting Vehicle Distance
SCC assist you in setting the distance from the vehicle ahead and will maintain the selected distance without you depressing the accelerator or the brake pedal.

Press the Vehicle distance button to set and 2 maintain the vehicle distance without
pressing the accelerator or brake pedal.

The vehicle distance will automatically

activate previous setting value when you

activate SCC.

Each time the button is pressed, the vehicle distance changes as follows:

Distance 4

Distance 3

Distance 1

Distance 2

Adjusting the vehicle speed
1. Push the + switch 2 UP to increase cruising speed. 2. Push the – switch 3 DOWN to decrease cruising speed.

NOTE: Quick toggle up/down will change speed by 1 mph. Holding switch up/down will change speed by 5 mph.
To Cancel Cruise Control/Smart Cruise Control Press the Driving Assist button 1 or depress the brake pedal.
Please refer to your Owner’s Manual for more information.

SANTA FE HYBRID

DRIVING
LEADING VEHICLE DEPARTURE ALERT (if equipped)
The Leading Vehicle Departure Alert function the driver of the departure of the vehicle in front when the vehicle is stopped.
To activate Select the following items on the instrument cluster in order: 1. Select User Settings on LCD display or infotainment system. 2. Select Driver Assistance 3. Select Driver Attention Warning 4. Select “Leading Vehicle Departure Alert” The function stops operation when the setting is deactivated. However, if the engine is turned off then on again, the function maintains in the previous state.

ELECTRIC PARKING BRAKE (EPB)

Applying
PULL

Stop the vehicle then pull the EPB switch.

Releasing
Press the EPB switch while depressing the brake pedal.

PULL
The EPB will automatically be applied when: – Shift to park on a slope – Engine off while Auto Hold is enabled – When the vehicle moves a bit in park – Condition below while Auto Hold is activated
* Driver’s door open/hood open/trunk(tailgate) open * Vehicle stops for more than 10minutes, stands on a steep slope
To release the automatic EPB: 1. Ensure seatbelts are fastened and the doors, hood and trunk are
closed 2. With engine running, depress the brake pedal and shift into
R(Reverse) or D(Drive) and then depress accelerator pedal.
NOTE: Please see the owner’s manual for additional details not written

HYUNDAI

SANTA FE HYBRID

DRIVING

DIGITAL KEY PAIRING (if equipped)
Hyundai Digital Key allows drivers to start the engine of their car using a smartphone app and Near-Field Communication (NFC). Hyundai Digital Key provides many of the same functions as your physical key. To pair your smartphone, complete the following steps:
1. Login to the Hyundai Digital Key Application using your MyHyundai username and password
2. Start the vehicle with the proximity key
3. Pair the phone to the vehicle as follows: · Navigation Vehicles: Settings Vehicle Digital Key Smartphone Key Save
· Display Audio: Instrument Cluster User Settings Mode Digital Key Smartphone Key Save
4. Open the Hyundai Digital Key Application on the primary user’s smartphone. Select the + Icon on the main screen of the smartphone app.
5. Place the smartphone on the Wireless Phone Charger in the vehicle and the process will begin automatically
6. Once the screen in the vehicle says saved, your Digital Key is ready to use.
NOTE: This application is only available for Android users.
If the NFC card is lost or stolen, please contact your local Hyundai dealer for replacement.

HYUNDAI

NEAR FIELD COMMUNICATION (NFC)

To lock/unlock your vehicle using the NFC key card, hold the key card up to the center of the door handle A . If you try to lock your vehicle with the NFC card under the following conditions, it will not work: · The Smart Key is in the vehicle. · The POWER button is in ACC or ON position. · Any of the doors, hood and trunk are open.
NOTE: If you overlap and use the key card with other NFC-enabled cards such as a transportation card or credit card, it will not work.
*For security reasons, the vehicle can only have one NFC key card paired to it at one time. Any time that a new Key card is paired to the car it will disable the previously paired Key Card .

SANTA FE HYBRID

DRIVING

SANTA FE HYBRID CUSTOMER DELIVERY CHECK LIST

HYUNDAI OWNER

DEALERSHIP NAME

BLUETOOTH® HANDS-FREE

CONNECTING YOUR PHONE
On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection. 4. Select Add New.
In your phone’s Bluetooth settings: 5. Select the <Vehicle Name> on your phone. 6. Enter the passkey from the radio or accept the authorization pop-up on your phone.
SWITCHING BETWEEN PAIRED PHONES
Using Voice Command: “Change Bluetooth device” On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection . 4. Select Connect next to the
desired phone.
For more information, visit HyundaiBluetooth.com

HYUNDAI

SANTA FE HYBRID

2023 Santa Fe Hybrid

Related Manuals

Leave a Comment Cancel reply