Contents
HYPERX QuadCast USB Condenser Mic Pop Filter
Product Information
The HyperX QuadCastTM is a high-quality USB microphone designed for gamers and content creators. It features a tap-to-mute sensor, gain control knob, polar pattern knob, headphone jack, USB cable port, USB cable, and a mount adapter that supports both 3/8 and 5/8 thread sizes.
Polar Patterns
| Symbol | Sound Direction | Polar Pattern |
|---|---|---|
| Stereo | Omni-directional | Stereo sound capture from all directions |
| Omnidirectional | 360-degree sound capture | Captures sound equally from all directions |
| Cardioid | Unidirectional | Focuses on sound from the front while reducing background noise |
| Bidirectional | Front and back sound capture | Captures sound from the front and back while reducing side noise |
Adjusting Gain Control
Use the gain control knob to adjust the microphone’s sensitivity. Turn it clockwise to increase the gain and counter-clockwise to decrease it. Finding the right gain level ensures optimal audio quality.
Using with PC or PS4TM
To use the HyperX QuadCastTM with your PC or PS4TM, connect the microphone using the included USB cable. The microphone is plug-and-play, so no additional drivers are required.
Connecting Headphones
You can connect your headphones to the headphone jack on the HyperX QuadCastTM to monitor your audio in real-time. This allows you to hear exactly what is being recorded or streamed.
Questions or Setup Issues?
If you have any questions or encounter any setup issues, please contact the HyperX support team or refer to the user manual available at hyperxgaming.com/support.
Overview
- A Tap-to-Mute Sensor
- B Gain Control Knob
- C Polar Pattern Knob
- D Headphone Jack
- E USB Cable Port
- F USB Cable
- G Mount Adapter*
* Supports both 3/8” and 5/8” thread sizes
Selecting a Polar Pattern
Adjusting Gain Control
Using PC or PS4TM
Connecting Headphones
Questions or setup issues?
Contact the HyperX support team or see user manual at: hyperxgaming.com/support
Overview
- A – Polar Pattern Knob
- B – Gain Control Knob
- C – Tap-to-Mute Sensor
- D – Headphone Jack
- E – USB Cable Port
- F – USB Cable
- G – Mount Adapter*
*Supports both 3/8” and 5/8” thread sizes
Selecting a Polar Pattern
Adjusting Gain Control
- Using PC or PS4TM
- Connecting Headphones
Questions or setup issues?
Contact the HyperX support team or see user manual at: hyperxgaming.com/support
HyperX is a division of Kingston.
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE
©2020 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA.
All rights reserved. All registered trademarks and trademarks are the property of their respective owners.