Instructions for use Assembly instructions
Logis 190
71090XXX / 71091XXX
Contents
Safety Notes
Gloves should be worn during installation to prevent crushing and culling injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart. (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking waterl
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see pageTo adjust the hot water limiter.
Using a hot water limiter in combination with a continuous flow water heater is not recommended.
Dimensions (see page 35)
Flow diagram (see page36)
Spare parts (see page37 )XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories (order as an extra)
special tool #58085000 (see page 33)
Installation putty (see page 34)
Cleaning (see page 40)
Operation (see page 38)
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Test certificate (see page 37)
Assembly (see page 33)
Assembly
Adjustment
Dimensions
Flow diagram
Test certificate
Operation
Spare parts
Cleaning recommendation / Warranty / Contact
 |
 |
| www.hansgrohe.com/cleaning-recommendation | www.hansgrohe.com/cleaning-recommendation |
 |
 |
| www.hansgrohe.com/cleaning-recommendation | www.hansgrohe.com/cleaning-recommendation |
Auestraße5-9D-77761Schiltach
Telefon+49(0)7836/51-1282
Telefax+49(0)7836/511440