Contents
hama 00081724 USB-C Car Charger
CABLE CONNECTING
Technical Specifications
- Car Charger Vehicle electrical system voltage: 12V, 24V
- USB-C Max. output voltage/current: 5V 3A 9V 2A 12V 1.5A (18W)
- USB-A Max. output voltage/current: 5V 2.4A (12W)
- Total output power: 30W max.
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.
ExplanationofWarning Symbols and Notes
- Risk of electric shock: This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.
- Warning: This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
- Note; This symbol is used to indicate additional information or important notes.
Package Contents
- Car Charger (USB-C +USB-A), Power Delivery (PD)/QC 3.0, 2.0
- These operating instructions
Safety Notes
- When using this product, observe the applicable local traffic laws and regulations.
- Take care that components such as airbags, safety areas, controls, instruments, etc., and visibility are not blocked or restricted.
- Donot allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
- Protect the product from dirt, moisture, and overheating, and use itinerary environments only.
- Donot drop the product and do not expose it to any major shocks.
- Donot operate the product outside the power limits specified in the technical data.
- Donot modify the device in any way. Doing so voids the warranty.
- Donot continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- As with all electrical products, this device should be kept out of the reach of children.
- Donot bend or crush the cable.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Donot use the product near heaters, other heat sources, or in direct sunlight.
- Dispose of packaging material immediately by the locally applicable regulations.
- Only use the article under moderate climatic conditions.
- Donot uses the product in areas in which electronic products are not permitted.
- Donot uses the product in a damp environment and avoids splashing water.
Risk of electric shock
- Donot open the device or continue to operate it if it becomes damaged.
- Donot use the product if the charging cable, adapter cable, or power cable is damaged.
Risk of electric shock
- Donot attempt to service or repair the product yourself. Leave any service work to qualified experts.
Operation
Note –12-V/24-Vehicle electrical system
The charger is suitable for use with a 12-Vor24-Vvehicle electrical system.
Warning –Connecting terminal devices
- Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.
- Ensure that the total power of all connected terminal devices does not exceed 30 W(USB-C 18 W+USB-A12W).
- Please refer to the instructions inthe operating manual of your terminal device.
Note –Power Delivery /QC3.0,2.0
- Plug &go: No manual setup is necessary, just connect and start:
- Voltage and power are automatically configured by Power Delivery/QC 3.0, 2.0.
- For efficient and optimized charging, the Power Delivery (PD)/QC 3.0, 2.0 function must be supported by your terminal device.
- With the large quantity of PD/QC-enabled terminal devices with different firmware versions, the function may be not fully supported.
Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
- Connect your device to the charger.
- Then connect the charger to the onboard electrical system’s car socket.
- The charging process is displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Then disconnect the charger from the line connection.
- When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.
Note –Car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. Therefore, when not using the product, disconnect it from the power supply to protect your car battery from discharge.
Care and Maintenance
Only use dry, soft cloths for cleaning.
Note: Disconnect the device from the power supply to be forced leaning or if it will not be used for a long period.
Technical specifications
Warranty
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.
Hama GmbH &CoKG 86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes.
Our terms of delivery andiveryand payments are applied.
FAQ
- What should I do if the device is damaged?
- If the device is damaged, do not use it and seek assistance from qualified experts.
- Can I clean the device with any type of cloth?
- No, only use dry, soft cloths for cleaning the device to avoid any damage.
- What is the total output power of the car charger?
- The total output power of the car charger is 30W max.