GUARDEON GPVM-B300BT 2 Wire IP and Wi-Fi Video Door Phone with Mini NVR User Manual

Home » GUARDEON » GUARDEON GPVM-B300BT 2 Wire IP and Wi-Fi Video Door Phone with Mini NVR User Manual

GUARDEON-logo

GUARDEON GPVM-B300BT 2 Wire IP and Wi-Fi Video Door Phone with Mini NVR

GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-product

  • Thank you for purchasing our products.
  • The products are subject to change without prior notice.
  • The company is not responsible for any safety accidents caused by the abnormal operation of the product.
  • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.

Warning and caution
Make sure to follow the instructions to prevent any danger or property losses.

Warning
Death or serious injury is expected.

GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-1 GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-2

Features

  • 2 wire IP & Wi-Fi video door phone with mini NVR
  • 7″ HD resolution 1024*600 with touchscreen
  • Backlight touch button operation
  • Embedded Linux operation system
  • Image&video quad split
  • Human detection
  • Video playback
  • Tuya APP control
  • Full-duplex two-way audio intercom
  • Room-to-room intercom
  • Support ONVIF IP cameras
  • Customize UI & Melody
  • Multimedia player
  • Free short messages between residents and visitors
  • Support max.128G SD card|inner memory max.100pcs picture Lock control | Calendar |Alarm clock
  • No disturb & Night mode
  • Support H265 & H264

The function and name of each part

GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-3

Indoor monitor Wi-Fi connection network

  • Step 1: Wi-Fi Connection for Tuya. Enter the settings menu,and  select Wi-Fi in the network configuration interface to enter the WIFI setting interface as in picture 1.
  • Step 2: After turning onthe  Wi-Fi, a Wi-Fi list will pop up, click the Wi-Fi account in the list, enter the password,d and connect to Wi-Fi, as shown in pictures 2 & 3.
  • Step 3: At the standby state, press GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-4 to enter system main menu, Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-5 to enter the interface as picture 4, then click “!” to see info and QR code
  • Step 4: Downloadthe  Tuya app from App Store or Google Play
  • Step 5: Open Tuya app.
  • Step 6: Scan QR connection Tuya APP

APP : Add Device GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-6 (in the upper right corner) → Scan the QR code on the monitor (like picture 4) → Done.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-7

Configuring room setting

  1. If only one panel and indoor monitor are connected, no need to set a room number.
  2. The master must be set to ROOM1, and the extensions can be set to ROOM 2/3/4… , but two indoor monitors cannot set the same number.
  3. In same family, set same room number (the room number can be set from 1 to 9999) Eg: Set the master monitor to 101/R00M1 and slave one to 101/ROOM2. Only the master monitor 101/ROOM1 needs to add the panel, and the slave one (101/ROOM2/3/4… ) will automatically add the door panel.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-8
Configuring IP camera

Automatically add IP cameras

  • Step 1: At the standby state, press GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-4 to enter the system main menu, Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-5 to enter the interface as picture 1, then click “ADD NEW DEVICES” to the picture.
  • Step 2: Click on the Camera to be added to the device list as in picture 2.
  • Step 3: After successfully adding the device address, the device address will be shown on the right as in picture 3.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-9 GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-10

Manually add IP cameras
The operation is the same as above. After entering the device list interface, click in front of CAM1-CAM8 on the right side of the list to enter the interface where you can add the main code stream and subcode stream. After the input is completed, you can add them successfully.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-11

Configuring VOIP

  • Step 1: At the standby state, press GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-4 to enter system main menu, Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-5 to enter the interface as picture, then click “VOIP” as picture 1.
  • Step 2: Input the AACOUNT / PASSWORD / SERVER, click SAVE and a SUCCESS popup will appear.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-12

Configuring the door panel to NVR

  • Step 1: Enter the “ GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-13” to enter the interface as picture 1.
  • Step 2: Enter the “RTSP” interface and turn on the RTSP button to enter the setting interface as picture 2, 3 & 4.
  • Step 3: The default password is admin123, users need to change to their own password, click CONFIRM to save.
  • Step 4: After turn on “RTSP”, the user can add the door panel to the NVR through the MainStream and SubStream addresses of the door panel, as shown in picture 5.

REMARK: Unbind the door panel or resetting the panel to resume the factory default password.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-14 GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-15

Modify monitor IP address

  • Step 1: At the system main menu, ClickGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-5 to enter the system setting interface, then click “GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-16 ” to enter the “IP CONFIG” setting.
  • Step 2: Turn off “DHCP”, and the user can modify the IP addresses of the corresponding LANGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-17

Modify the outdoor panel address

  • Step 1: Enter the device management setting as in picture 1.
  • Step 2: Turn off “DHCP”, and the user can modify the IP addresses of the panel as in picture 2. REMARK: If the door panel is offline, the address cannot be changed, as shown in picture 3.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-18 GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-19

Unbinding the monitor

Remove device from the cloud

GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-20

Restore factory settings
Unbind the monitor, all data will be deleted and resumed to the factory settings.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-21

Video intercom operation

Door station call
When a visitor calls in door station, all the indoor monitors in this house will chime simultaneously as below.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-22

The LCD will show “INCOMING CALL”. Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-23 to talk with the visitor, as picture 1. Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-24 to transfer the call to other monitors. The monitor will return to a standby state if no one answers after chime time ends. At ringing or answering state, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-25 icon to unlock the door and the LCD will show “DOOR UNLOCKED” , click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-26 to unlock the gate and the LCD will show “GATE UNLOCKED”. If there is another incoming call when talking with CAM1, the LCD will show
“SOMEONE IS VISITING AT CAM2″, then click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-23 can switch the display image to CAM2 and talk with another visitor.

Note

At the answering or intercom between monitors, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-27the icon, then it turn toGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-28, the microphone will be mute, and the LCD will show “MUTE”, clickGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-28 icon again the microphone return to normal GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-27 , and the LCD show “PLEASE TALK”.

Incoming call answer / Call transfer

Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-29 on the main interface to enter the dial keyboard interface.

  1. Call extension monitor: Enter the extension room number directly. Call “0” means to call all extension monitors.
  2. Call apartment resident: Enter “1+” resident’s room number.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-30
  3. Call management center: 1 + 0 .
  4. Call SIP/VOIP: Enter “2+” IP phone number.

Note:
When you use the standard SIP protocol, the calling number should be the phone number of the VOIP account.

Lock / Gate unlock time setting

Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-30in the main menu to enter the monitoring screen. Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-33to enter the setting interface, then click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-32in the upper right corner to set the unlocking time.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-34

DVR setting
You can set up 4 DVR channels, as shown below.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-35

NO. Setting item Selection Note
DVR ON Activate the DVR function.
OFF
BEGIN TIME The begin time of DVR & Motion detect.
END TIME The end time of DVR & Motion detect.
NO. Setting item Selection Note
MOTION DETECT SENSITIVITY LOW / NORMAL

/ HIGH

 Set the motion detection to LOW / NORMAL / HIGH level.
MOTION SCREEN SAVER ON The screen will be open, when a motion has detected.
OFF The screen will keep in standby status, when a motion has detected.
 

6

 HUMAN DETECTION ON The alarm and recording function will not be triggered until the panel detect a movement of human shape.
OFF

Remarks: Click on the GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-36/ icon to select.

Note:

  • a. When motion detection is on, the system will record continuously for 1 minute if motion has been detected, the cyclic recording time is 1 minute – 1 minute -1 minute.
  • b. DVR function can not work when the Micro SD card less than 2G.
  • c. To act DVR function well, pls use the Micro SD card with capacity of no less than 8G.
  • d. When the start time and the end time are set as the same time, the DVR function will continue.

Parameters of DVR recording

SD card capacity Resolution ratio Frame rate
2G – 128G 1920×1080 25

Intercom video recording
After inserting the SD card and setting the RECORD MODE DOORBELL PRESS to MAKE VIDEO, when the visitor Door station call, the screen will display the recording status, and the recorded video will be stored in the inserted SD card, which can be viewed and played in the DVR, as shown in the picture below.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-37

Talking volume / Ring talking volume / Ring type / Brightness / Contrast / Saturation
At the state of monitoring, ringing, talking, as the picture 1, then click to picture 2, and click each related setting to adjust volume / ring type/brightness / contrast / saturation / door unlock time / gate unlock time.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-38 GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-39

Ringtone setting
On the main menu, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-40 to enter the ringtone setting interface.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-41

NO. Setting item Selection Note
1 INTERCOM DURATION 1 – 10MIN Communication time between monitor and outdoor panel.
2 RINGTONE DURATION 10 – 60S Ring time when incoming call.
3 RINGTONE VOLUME 0 – 9 0 is mute, 9 is the hightest volume.
NO. Setting item Selection Note
 

4

  

DOOR RINGTONE DURATION

  

0 – 60S

 Ring time of outdoor panel when someone is calling. If the ringtone duration of the monitor is setted shorter than the door panel, then the door ringtone duration will be the same as that of the monitor.
5 RINGTONE INTERCOM TYPE 1 – 13 Ringtones for both call button and that of callings between monitors.
6 RINGTONE RINGBELL DURATION 0 – 9S Ring time of ringbell when someone is calling.
7 RINGTONE CALL BUTTON DURATION 0 – 60S Ring time of call button after pressing it.
 

 

8

  

 

 

NIGHT MODE

 NIGHT MODE ON Open night mode.
OFF Close night mode.
RINGTONE VOLUME 0 – 5 0 is mute, 5 is the hightest volume.
BEGIN TIME Begin time of night mode.
END TIME End time of night mode.

Note: ClickGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-42 on the right to make a selection.

Customized ringtone
When insert the SD card into the indoor monitor, the SD card will auto-set up an MYRING folder with 10 inner folders of CAM1/CAM2/CAM3/CAM4/CAM5/CAM6/CAM7/CAM8/ALARM/ INTERCOM. Save an AAC file in each of the 10 folders, insert the SD card into the indoor monitor again, then the saved AAC file can be set as a customized ringtone.

Remark: If the channel name is changed, the ringtone cannot be customized.

Broadcast function
This function allows you to broadcast information for all monitors in your house. At the main menu state, click the GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-43, the display will show BROADCAST REQUEST, and the monitor in other rooms will show BROADCASTING. Now you can make a broadcast.

Customized ringtone
When insert the SD card into the indoor monitor, the SD card will auto-set up an MYRING folder with 10 inner folders of CAM1/CAM2/CAM3/CAM4/CAM5/CAM6/CAM7/CAM8/ALARM/ INTERCOM. Save an AAC file in each of the 10 folders, insert the SD card into the indoor monitor again, then the saved AAC file can be set as a customized ringtone.

Remark: If the channel name is changed, the ringtone cannot be customized. On the main menu, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-44to enter the alarm setting interface.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-45

NO. Setting item Selection Note
1 TIME SYNC ON Automatic time synchronization.
OFF
2 SYSTEM TIME SETTING Hour : Minutes: seconds
3 SYSTEM DATE SETTING Day / Month / Year
 

 

4

  

 

ALARM CLOCK

 DISABLE The alarm clock is not working
ALAWAYS Ring for 1 minute at the set time every day.
SUN to SAT Ring for 1 minute at a specific set time

Monitor listening
At main menu state, clGUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-46ick to start the monitor function. If you have more than 2 indoor monitors, there would be option listening rooms for choosing on screen, click the target indoor intercom to do monitor listening.

Note

  • When monitoring, the user can hear the sound from the being monitored room, but the people at the be-monitored intercom room can not hear the voice from the monitoring intercom room.
  • When there are more than 2 monitors in the system, monitor listening function is available only when Monitor listening function is turn on. Please check the system setting menu to see how to turn on the monitor listening function.

Auto leaving message

Auto system leaving message
This function let your visitors to leave audio messages for you while nobody is at home. You should activate the ASK FOR VOICEMAIL function in the SYSTEM SETTINGS before leaving home. When the visitor presses call button on the door panel and the chime time ends, visitor can hear a voice “Hello, no one is at home at this moment, please leave a message after the tone” from the doorpanel and have 20 seconds to leave a message for you.

Auto manual leaving a message

You can record audio message manually. Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-47on the main menu, select an audio file in any folder you want to set, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-48at the right top of the page, to enter the CONFIG ATTENTION TONE menu as pictures 1 & 2.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-49

Click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-42to set the tone type to user tone and play type to start tone. You can also adjust the volume of the note. After completing the above operation, click confirm to set the same operation setting end tone.

Customized background
Please insert a SD card into the monitor, the SD card will be auto-setup a Skin folder. Save a JPG file with a resolution less than 1920×1080 into the folder. Insert the SD card to the monitor again, click the skin icon to switch to a different skin picture in the cycle, can switch to user’s custom skin.

On the system settings menu, click to enter the device information interface, then click RESET.

Restore settings

On the system setting menu, click GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-50 to enter the device information interface, then click RESET.

  1. When you select RESET SETTINGS, This will delete the data from your monitor, including system settings such as: Ring Tone, Alarm Clock, DVR setting, IP setting, Door setting … This will not be reset: room number, added devices, APP data and internal flash photos.
  2. When you select RESET FACTORY SETTINGS, This will delete all data from your monitor.GUARDEON-GPVM-B300BT-2-Wire-IP-and-Wi-Fi-Video-Door-Phone-with-Mini-NVR-fig-51

Leave a Comment