FCTYD Spaceship Projector Lamp
User Manual
Spaceship Projector Lamp
Contents
FCTYD Spaceship Projector Lamp
Atention
★ The light source of the spaceship lamp project is strong,please do not stare at the light source for a long time when spaceship projection lamp is in projection mode. 
Projector Lamp Mode
Remote Control Introductions
★ Closed for 1 hours: Shut down after one hour, the light flashes once means the setting is successful.
★ Closed for 2 hours: Shut down after two hours, the light flashes once means the setting is successful.
★ Closed for 4 hours: Shut down after four hours, the light flashes once means the setting is successful
Product Information
| Product material: | ABS+PC |
| LED Lampshade material: | PS |
| Light Source: | LED x 3 |
| W o r k I n p u t : | 5V 2A |
| Work Power: | 10W |
| Control Method: | Remote control&Button |
| Laser wavelength: | 532nm |
| Laser Power: | 0.3mw |
★ Spaceship Projector Lamp
Package List:
1×Spaceship Projector Lamp
1×Wooden Mount
1×USB Type-C Charging Cable (5 ft)
1×Remote Control(2*AAA batterys, included)
1×User Manual
Notice:
Please be careful not to let the cable plug press the button next to it 
Servers: 24 Hours online, just for your satisfaction!
God Created Light,
Show the Beauty of Light.
FCC Caution.
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.