Greenworks G24PSHK2 Cordless 2 in 1 Pole Saw and Pole Hedge Trimmer User Guide

Home » Greenworks » Greenworks G24PSHK2 Cordless 2 in 1 Pole Saw and Pole Hedge Trimmer User Guide

Greenworks logo

G24PSHK2 Cordless 2 in 1 Pole Saw and Pole Hedge Trimmer
User Guide

TROUBLESHOOTING

Problem Possible cause Solution
The motor does not start when you pull the trigger. The battery pack is not installed tight-
131.
Make sure that you tightly install the battery pack in the machine.
The battery pack is out of power. Charge the battery pack.
The machine smokes during operation. The machine has damage. 1. Immediately stop the ma-chine.
2. Remove the battery pack.
3. Speak to service center.
The motor is on, blades do not
move.
The machine has damage.
service center.
Do not use the machine and speak to
The blades are blocked. Remove battery pack then clear blockage from the blades.
There is too much noise and/or vibration during opera- tion. The parts are loos-en. 1. Stop the machine.
2. Remove the battery.
3. Inspect for damage.
4. Check and tighten loose parts.
The parts have damage Do not use the ma-chine and speak to service center.

Leave a Comment