Micro-Drip-System
Art. 13400
Installation video
13400-20.961.01/1223
(1) + (2)
A 1x 13333 B 15m 13 mm (1/2“)
C 10x 13204 D 2x 13205
(3)
E 20m 4,6 mm (3/16″) F 5x 13211
G 5x 13215 H 3x 13217
(4)
I 10x 13305 J 20x 13317 K 1x 01338
(5)
L 5x 13208 M 20x 13218
(V1)
(V2)
+ GARDENA Micro-Drip System
Micro-Drip-System planner
 |
 |
 |
|
 Art. 13312 |
 |
 |
|
 Art. 13302 |
|
|
|
 Art. 13315 |
 |
||
 Art. 13314 |
 |
|
|
 Art. 13304 |
|
|
|
Ø 13mm (1/2″)
Art. 1890 Art. 1867
ASSEMBLY
- Screw the master unit to the water supply or the water control.
- Cut the 13 mm connecting pipe and mount the 13 mm connectors.
- Cut the 4.6 mm supply pipe and fit the 4.6 mm connectors and check if shutoff-/regulation valves are required.
- Position the drip heads on the plants and connect them to the 4.6 mm supply pipe.
- Fix with the pipe pegs.
Tip: Use shutoff-/regulation valves to regulate plant strands with different water requirements.
CLEANING AND MAINTENANCE
Before frost sets in, disassemble, empty, clean and store the master unit in a frost-free place.
If necessary, use the included cleaning needle to clean the drip heads.
LP_GD_MDS_13400_12_12.indd
12.12.23 09:14