FRICO IR3000 Infrared Heater Instruction Manual

Home » FRICO » FRICO IR3000 Infrared Heater Instruction Manual

FRICO logoOriginal instructions
IR3000, IR4500, IR6000FRICO IR3000 Infrared Heater

IR3000 Infrared Heater

Ecodesign Regulation (EU) 2015/1188 concerning local space heaters does not apply to all application areas.
The Regulation applies when an installation is intended to provide thermal comfort for people in the premises. The Regulation does not apply to heating installations of a more technical nature e.g. in engineering/utility rooms, in production processes, frost protection, etc. The Regulation also does not apply to installations in vehicles, offshore or outdoors. Many of Frisco’s products can be used as both local space heaters (as defined in (EU) 2015/1188) and for technical heating purposes. It is up to the installer responsible for the installation to assess whether the Ecodesign Regulation is applicable or not. Control solutions for installations not covered by the Ecodesign Regulation are listed in a separate table.

FRICO IR3000 Infrared Heater - Minimum distances

Type L1 [mm] L2 [mm]
IR3000 600 1125
IR4500 900 1500
IR6000 1200 1875

Minimum distances

FRICO IR3000 Infrared Heater - Minimum distances 2

[mm]

Ceiling A 400
Wall, long side of the unit B 400
Wall, short side of the unit C 400
Flammable material D 700
Floor E 2300

FRICO IR3000 Infrared Heater - Floor

Type HxWxD [mm]
IRG3000 869x362x40
IRG4500 1235x362x40
IRG6000 1615x362x40

FRICO IR3000 Infrared Heater - Accessories

Controls

Type HxWxD [mm]
TAP16R 87x87x53
TEP44 87x87x55
RB3 155x87x43
RB123 155x87x43
RTX54 82x88x25
SKG30 115x85x40
PDK65 102x70x50

FRICO IR3000 Infrared Heater - Controls

Controls for installations not covered by the Ecodesign Regulation (EU) 2015/1188

Type HxWxD [mm]
KRT1900 165x57x60
KRTV19 165x57x60
S123 72x64x46

FRICO IR3000 Infrared Heater - Regulation

Technical specifications

Type Output steps [kW] Voltage  [V] Amperage [A] Max. element temperature[°C] Dimensions LxHxW [mm] Weight [kg]
IR3000 1/2/2003 400V3N~* 4,3 700 1125x83x358 9
IR4500 1.5/3/4.5 400V3N~* 6,5 700 1500x83x358 11.1
IR6000 2/4/2006 400V3N~* 8,7 700 1875x83x358 13.2

*) Can also be connected 400V3~, but then without output steps. With neutral, one element tube at a time can be connected.
Protection class: IP44.
CE compliant.

Wiring diagrams

Internal wiring diagramFRICO IR3000 Infrared Heater - diagrams

Control by thermostat and relaybox

FRICO IR3000 Infrared Heater - relayboxControl by thermostat, relaybox and black bulb sensor
FRICO IR3000 Infrared Heater - sensorControl by relaybox with 3 step output control and presence detector

FRICO IR3000 Infrared Heater - presence detectorControl by thermostat, contactor and switch – for installations not covered by the Ecodesign Regulation (EU) 2015/1188

FRICO IR3000 Infrared Heater - Ecodesign

FRICO IR3000 Infrared Heater - Icon 1 Main office Frico AB Industrivägen 41
SE-433 61 Sävedalen Sweden
Tel: +46 31 336 86 00
[email protected]
www.frico.net
For latest updated information and information about your local contact: www.frico.net
Artnr. 204566, 2022-10-10 ZD

Leave a Comment