Contents
EMEET GeniusCall HS80 Wireless Headphone
IN THE BOXOverview
Operation Instructions
Power on/off
- Press and hold the power/Bluetooth button for 2 seconds to turn on the device. Press and hold the button for another 2 seconds to turn off the device.
Connection and Pairing
Connect to a PC
- Insert the EMEET Adapter attached to the device into your PC’s USB port to operate.
- Connect the headset with a USB cable, and insert the other end of the USB cable into your PC’s USB port. The headset serves as a wired one.
Pair with a smartphone
- Press the power/Bluetooth button twice until the indicator flashes blue and a prompt sound is heard from the headset.
- Select “EMEET GeniusCall HS80” from the list of Bluetooth devices to connect with it.
Wearing
- You can wear the headset with the boom on either side (lefter right). Pull the boom to the bottom to switch between the left and right channels.
- You can mute or unmute the MIC during a call by moving the boom. (Note: The indicator remains unchanged when the MIC is muted or unmuted)
Charging
- To charge the headset, connect the charging base to a power source through a USB cable, then place the headset on the charging base.
- Connect the headset to a power source through a USB cable. The power indicator blinks green during charging and turns off when the headset is fully charged.
Button Operation Instructions
| Button | Operation | Action | |
|
Power/Blueto button |
oth |
Press and hold for 2 seconds | Power on/off |
| Press twice | Bluetooth pairing starts (with the device on) | ||
| Press | Check battery level (with the device on) | ||
| Press and hold for 10 seconds | Force restart | ||
| Mute/unmute | MIC | Press | Mute/unmute MIC (duringa call) |
|
Volume+ |
Press | Volume+ | |
| Press and hold | Next | ||
|
Volume- |
Press | Volume- | |
| Press and hold | Previous | ||
|
Multifunction Button |
Press |
Answer/switch a call | |
| Play/pause | |||
|
Press and hold |
Reject a call (when a call comes in) | ||
| End a call (during a call) | |||
| Rapidly press twice | Call back | ||
| Simultaneously press and hold the Volume+ and Volume- buttons for 10 seconds | Reset | ||
LED Indicator
| Feature | Status | LED |
|
Charging A |
Charging | Flashes green |
| Fully charged | Off | |
| Status indicator A | Calling | Steady red |
|
Battery indicator B |
Low battery | Red for 5 seconds and off |
| Medium battery | Yellow for 5 seconds and off | |
| High battery | Green for 5 seconds and off | |
| Bluetooth status
indicator B |
Bluetooth pairing | Flash blue |
| Bluetoothconnected | Blue for 5 seconds and flashes | |
|
Dongle status C |
Pairing | Flash blue |
| Connected | Steady blue |
Download Application
Please visit www.emeet.com/EMEETLINK to download the EMEETLINK PC desktop app for software updates and other user-defined operations.
Note: The device can operate normally even if EMEETLINK is not downloaded.