EBS MicroBass 3 channel Preamp Pedal User Manual

Home » EBS » EBS MicroBass 3 channel Preamp Pedal User Manual

EBS-logo

EBS MicroBass 3-channel Preamp Pedal User Manual

EBS-MicroBass-3-channel-Preamp-Pedal-product

CHANNEL CONTROLS, SWITCHES & OUTPUTS

EBS-MicroBass-3-channel-Preamp-Pedal-fig-1

MUTE FOOT SWITCH
Mutes the balanced outputs and the master output. Fx Send is not affected by this function. The Mute switch also enables the built-in tuner for silent tuning, An internal switch can set the tuner to be active at all times.

EBS-MicroBass-3-channel-Preamp-Pedal-fig-2

DRIVE FOOT SWITCH
Engages the drive channel. The clean channel is always active, but if the BLEND control is turned up, in parallel mode, this switch will make the sound jump from the clean channel to the drive channel when activated.

TECHNICAL SPECIFICATIONS

 

Clean Channel:

 

Drive Channel:

Input Impedance: Parallel mode 1.5 Mohms // 44 pF Input Impedance: 1.8 Mohms // 22 pF
Serial mode 10 Mohms // 22 pF Drive: Gain Range 40 dB
Gain: Gain Range min/max -oo/+30 dB Drive Engines:
Gain Peak LED +10 dBv Lo: Type 2nd harmonics soft
Frequency Response +0/-3 dB 20-20.000 Hz Hi: Type Symmetrical 2-stage with

+18 dB gain

Character: Filter Type Shelving High/Low Pass
Gain: Lo +6 dB @ 80 Hz Type Switch: Thin/Normal/Deep Pre Drive EQ
Mid -2 dB @ 900 Hz Filter Section:
Hi +3 dB @ 7.5 kHz Tone Filter: Type 6 dB/oct. Low Pass.
Bright: Filter Type Shelving. Frequency Range 700 – 20k Hz
Gain: +10 dB @ 10 kHz Mid Filter: Type Bandpass Filter.
Filter Section: Frequency Range 100 – 4.500 Hz.
Bass Filter: Type 12 dB/oct. Shelving. Q 1.2
Gain Range +/- 18 dB @ 60 Hz Gain Range +/- 15 dB
Mid Filter: Type Bandpass Filter. Common Features:
Freq Range 50 – 5.000 Hz. Effects Loop: Loop Signal Level nominal -10 dBv
Q – Boost 0.5 – 1.3. Gain Unity (1:1)
Q – Cut 0.5 – >5. Output Impedance <100 ohms
Gain Range +/- 12-15 dB Input Impedance >200 kohms // 22 pF
Treble Filter: Type Shelving. Phones Out: Recommended Imp. 32 – 200 ohms
Gain Range +/- 18 dB @ 8 kHz Aux Input: Input Impedance 20 kohms
COMP/LIMIT: Comp Gain 0 dB Nominal Level -10 dBv
Attenuation max 24 dB Output: Output Impedance <1 kohms
Compression Ratio max 3:1 Signal Level nominal 0 dBv
Attack (80%) typ <10 ms Balanced Outputs: Output Level nominal -20dBv
Release (80%) typ 100 ms XLR Connections 1-GND, 2-Hot, 3-Cold
Options Pre/Post EQ, L/R Ch. in stereo mode
Auxiliary Info:
F OR MORE PEDALS, AMPS & Power Requirements Idle 450mA @9V.
ACCESSO RIES, SCAN THE QR-COD WWW.EBSSWEDEN.COM E TO VISIT Max 750mA @9V

(with headphones at max output level)

Dimensions (WxDxH): max 168 x 124 x 53 mm /

6.6” x 4.9” x 2.1”

Weight: 660 g ( 1.5 lbs.)

Specifications are subject to change without notice.

BLOCK LAYOUT SCHEME

EBS-MicroBass-3-channel-Preamp-Pedal-fig-3

Download PDF: EBS MicroBass 3-channel Preamp Pedal User Manual

Leave a Comment