Contents
Dr Brown’s Natural Flow Deluxe Bottle Warmer
INTRODUCTION
Dr Brown’s Natural Flow Deluxe Bottle Warmer Thank you for purchasing the Dr Brown’s Natural Flow Deluxe Bottle Warmer. Before use, please refer to the Safeguard information stated in the instructions. This unit accommodates 2oz, 4oz and 8oz bottles, as well as small jars and containers of baby food.
PARTS
- A. Hinged lid
- B. Main housing
- C. Removable water reservoir
- D. Control panel and LCD Timer display
- E. Removable basket
- F. Reversible riser
Bottle Warmer Parts
- The water reservoir is refillable so the user only needs to add water to the appliance every 6 – 12 bottle warming cycles.
- The adjustable removable basket configures for easy, fast and reliable warming of bottles and jar sizes.
- The hinged lid on top of the heating chamber should always be closed during the warming cycle to keep steam inside the appliance which creates more efficient and safer heating in less time. When unpacking this for the first time simply snap the hinged lid in place making
sure the parts are fully engaged. - Fill the reservoir with water through the opening. Please note, do not exceed the recommended amount of water. Hard water may increase build up or other residue on the heating plate. If you have hard water, we recommend that you use filtered or distilled water.
- Position the short neck of the fill opening into the bottom of the slot on the appliance’s right side. Pivot the reservoir up to a vertical position and snap into place.
- The
appliance will now automatically fill the heating chamber inside to the correct level - Before warming the Dr Brown’s bottle in this appliance, always remove the bottle components to prevent the vent from leaking fluid if gas forms during warming. If leaking does occurs during warming, pour out any remaining water in the appliance’s heating chamber and reservoir, and refill the reservoir with fresh water.
- Press any button on the keypad (except 0) to display the ‘last time used’. If correct press >. If you want to adjust the time, press the ‘up’ arrow button to increase the length of time or the down arrow button to decrease the time. The appliance allows you to determine the appropriate heating time based on the starting temperature of the bottle. Please note, the last time programmed is stored in the memory and is displayed when the appliance is turned on.
- Once the cycle has finished the display will also flash 00:00 for 60 seconds and then shut off. There is an audible 5-beep alarm with a flashing LCD when the heating cycle is complete and the bottle/food is ready to be removed from the appliance. You can open the top of the product at this point. Please note, you can turn the appliance off at any time by pressing the 0 button. Automatic power off after 10 minutes. We would recommend allowing the appliance to cool before re-using it.
- To remove the bottle/food jar, grasp the side tabs of the basket and remove it immediately to prevent residual heating. Place it on the countertop and remove. Gently swish the fluid in the bottle around or stir the food thoroughly so the temperature becomes uniform throughout the container.
Cleaning the Appliance
- Always unplug the appliance and ensure it is cool before cleaning any part.
- Remove water reservoir and empty all water out of the unit.
- Wipe the exterior surfaces as well as the inside of the heating chamber with a damp cloth or sponge using mild soap. DO NOT submerge the unit in any water or liquid.
- Removable baskets are dishwasher safe (top rack) or wash with soapy water. Rinse with clean water. Air dry.
- DO NOT use scouring pads, abrasives or solvents for cleaning.
- DO NOT disassemble the product. There are no serviceable parts inside.
Descaling the Appliance
It is important to de-scale this appliance every 4 weeks to ensure that it continues to work properly. Pour all remaining water out of the water chamber and reservoir. To de-scale, mix 2oz (50 ml) of white vinegar with 4oz (100 ml) of cold water in the water reservoir, and then run the mixture through the bottle warmer as you normally would until any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.
Further information
For further information please contact the Dr Brown’s Customer Service Department on 01538 399541 or e-mail [email protected]