DJFHKO MJ-W885-3 Vintage Bathroom Vanity Light Fixtures Installation Guide

DJFHKO MJ-W885-3 Vintage Bathroom Vanity Light Fixtures Installation Guide

Installation instructions

MJ-W885-3 

1. Be careful! Before installing the lamp, please cut off the power or turn the switch to “OFF” state.
2. Fix the hanging plate on the junction box with screws.
3. Connect the power cord and ground wire with the terminal cap as required and put them in the junction box, make sure the wiring is secure and in good contact.
4. Fix the ceiling plate on the hanging plate with screws.
5. Remove the outer ring of the accessory “F” lamp holder fromthe lamp body.
6. Install the G9 light source into the lamp head. Make sure that the light source is firmly installed and in good contact.
7. Lock Glass on the lamp body.