DILUMEN LEON400 Bathroom Mirror Light Instruction Manual

Home » DILUMEN » DILUMEN LEON400 Bathroom Mirror Light Instruction Manual

DILUMEN LEON400 Bathroom Mirror Light

Product Specifications:

  • Model: LEON400/LEON400P
  • Power Supply: 230V~50Hz
  • Power Consumption: 10W
  • Color Temperature: 4000K
  • Luminous Flux: 800LM

Product Usage Instructions

Safe Installation:

This product is designed for indoor installation only. Installation should be carried out by a qualified electrician. Ensure proper grounding during installation.

Power Supply:

Connect the product to a power supply of 220-240V~50Hz. Do not use cleaning products on the product.

Cleaning Instructions:

Use a dry cloth for cleaning. Avoid using cleaning agents as they may damage the product. Refer to the provided mounting instructions for installation guidance.

Frequently Asked Questions

Q: Can this product be installed in a bathroom?

A: This product is suitable for indoor installation but should not be installed in areas where it may come into direct contact with water, such as bathrooms.

Q: What should I do if the product is damaged?

A: If the product is damaged, it should be replaced immediately to avoid any risks during usage.

Q: Can I use this product in a commercial setting?

A: This product is designed for residential use. For commercial settings, please consult with the manufacturer or a qualified electrician for suitability.

Mod. LEON400/LEON400P 
230V~50Hz, 10W, 4000K, 800 LM

Beware of high voltage and electric shock.

The lamp rated IP44 should not be installed in the bathroom zones 0,1 and 2.

SAFE INSTALLATION

  • The luminarie is designed for indoor installation only.
  • The electrical connection may only be performed by a qualified electrician.
  • LED luminaire is designed for a power supply of 220-240V ~ 50Hz
  • When installing, the luminaire cannot be connected to power source.
  • If an external cable or cord is damaged, it should be replaced to avoid the risk only by a person with similar qualifications. The luminaire is made in protection class II, so it does not need to connect ground connection wire.
  • To clean the luminaire use only a soft, dry cloth. Do not use cleaning agents.
  • Install the luminaire according to picture: on mirror (Picture A), on cabinet(Picture B),on wall(Picture C).

RM1002 EASEY COMM BLDG
253-261 HENNESSY ROAD WANCHAI HK

www.dilumen.com

Email: [email protected]

Muhuo GmbH
Nobeistrasse 3-5, 41189, Moenchengladbach, Germany.

Ningbo Saige Lighting Technology Co.,Ltd
No. 58 Weisi Road. Sibei Industrial Zone,Simen Town.
315470 YuYao City ZheJiana Province.P.R.C.

Leave a Comment