Contents
DALTACK A3 Magazine File Holder Desk Organizer with 4 Vertical File Holder and Drawer
Product Information
Specifications
- Model: A Plus
- Color: C
- Includes: Spare screws
- Email for support: [email protected]
Product Usage Instructions
Section 1: Assembly
To assemble the product, follow these steps
- Fold up both sides of component A.
- Connect the folded sides of A using component B.
Section 2: Attaching Metal Mesh C
To attach the metal mesh C, follow these steps
- Push metal mesh C along the grooves on both sides in a parallel manner.
Section 3: Attaching Metal Mesh D and E
To attach metal mesh D and E, follow these steps
- Insert screw F into the screw hole and tighten it with screwdriver G.
- Clip metal mesh D vertically into the grooves on both sides.
- Insert screw F into the screw hole and tighten it with screwdriver G.
- Clip metal mesh E into the grooves in turn.
- Push drawer H parallel to the bottom.
Section 4: Finalizing Assembly
To finalize the assembly, follow these steps
- Place label J on the metal mesh D.
- Install the non-slip rubber feet I on the base.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter any problems?
-
- A: Please contact our support team at
- for assistance.
INSTALLATION INSTRUCTION
Fold Sides of Part A inwards
- Fold up both sides of A and connect them with B.
- Insert screw F into the screw hole and tighten it with screwdriver G.
- Push metal mesh C in parallel along the grooves on both sides.
- Insert screw F into the screw hole and tighten it with screwdriver G.
Clip metal mesh D vertically into the grooves on both sides.- Insert screw F into the screw hole and tighten it with screwdriver G.
- Clip metal mesh E into the grooves in turn, push drawer H parallel to the bottom.
- Place label J on the metal mesh D, install the non-slip rubber feet I on the base.
Any problem, please contact the email [email protected]