Instruction Manual
ASSEMBLY INSTRUCTION
MODEL#EMO-5400-BF
Contents
EMO-5400-BF Emory Four Light Ceiling Mount
F=
(W1’’xL7-7/8’’)x42sets
WARNING:
Electrical Danger
Turn Power off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need – Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE This fixture is Damp rated
How to install
- Place the mounting bar over the outlet box. Mark two points on the ceiling at the center of the keyhole on the mounting bar.
- Drill two holes at the marked points and insert the wall anchors.
- Place the mounting plate over the outlet box and secure it with outlet box screws. Insert the anchor screws into the wall anchors (Installed in step#2) and tighten. .
- Raise ceiling pan allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the cap nuts.
- Hang glass drop to the ceiling pan.
- Install the bulbs(not included) into the socket.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Number
Part Numbers
A. (1)-Mounting hardware
B. (1)-Mounting bar
C. (1)-Ceiling pan
D. (2)-Cap nut
E. (4)-Socket
F. (42)-Glass drop W1’’xL7-7/8’’
