MAL05 150W Area Light
Instruction Manual
Contents
Specifications
Construction:
- Rugged one-piece, die-cast aluminum housing secures the thermally conductive LED panel and electrical chamber
- Low profile, 3G vibration rated compact design minimizes wind load requirements.
- Housing is completely sealed against moisture and environmental contaminants.
Optics:
- Available in IES Type III, IV, V distributions
- Light engines are available in standard 4000 K and 5000 K (70 CRI) configurations.
- Scalable Lumen Packages from 13,900 to 42,000 Lumens replaces up to 1000W Metal Halide.
- Optics is precisely designed to shape the distribution, maximizing efficiency and application spacing.
- The optics can conform to dark sky requirement.
Electrical:
- Universal 120-277 VAC or 347-480 VAC input voltage
- Standard with 1-10V dimming driver(s)
- THD: ≤20%
- Power Factor: ≥90%
Controls:
- Optional occupancy sensor
- Optional Photocell
Ambient Temperature:
- Ambient operating temperature -40˚ C to 40˚ C (-40℉ to 104 ℉).
Installation:
- Suitable for mounting heights ranging from 26-50’ in area lighting applications
- Round pole, Square pole, Slipfitter, wall mount and yoke are available.
- The design can be operated by one person to install the whole lamp
Lifespan:
- Estimated 100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations
Finish:
- It’s available in black or optional dark bronze, silvery gray or white.
Certifications:
- UL wet location listed
Note:
Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 ℃(±5 ℃ ) specifications subject to change without notice.
Applications:
Auto dealerships, parking lots, walkways, roadways, campuses, façade lighting, grocery stores and other public areas.
PERFORMANCE DATA
| 4000K(70CRI) | 5000K(70CRI) | |||||
| SYSTEM WATTS | VOLTAGE | DIST.TYPE | LUMENS | LPW | LUMENS | LPW |
| 120-277V/347-480V | 3 | 14100lm | 141 lm/W | 14100lm | 141 lm/W | |
| 100W | 120-277V/347-480V | 4 | 14000lm | 140 lm/W | 13900lm | 139 lm/W |
| 120-277V/347-480V | 5 | 14200lm | 142 lm/W | 14200lm | 142 lm/W | |
| 150W | 120-277V/347-480V | 3 | 21000lm | 140 lm/W | 21000lm | 140 lm/W |
| 120-277V/347-480V | 4 | 20500lm | 137 lm/W | 20500lm | 137 lm/W | |
| 120-277V/347-480V | 5 | 21000lm | 140 lm/W | 21000lm | 140 lm/W | |
| 250W | 120-277V/347-480V | 3 | 35000lm | 140 lm/W | 35000lm | 140 lm/W |
| 120-277V/347-480V | 4 | 35000lm | 140 lm/W | 35000lm | 140 lm/W | |
| 120-277V/347-480V | 5 | 36000lm | 144 lm/W | 35000lm | 140 lm/W | |
| 300W | 120-277V/347-480V | 3 | 42000lm | 140 lm/W | 42000lm | 140 lm/W |
| 120-277V/347-480V | 4 | 41000lm | 137 lm/W | 41000lm | 137 lm/W | |
| 120-277V/347-480V | 5 | 42000lm | 140 lm/W | 42000lm | 140 lm/W | |
ELECTRICAL DATA
| Number Of Drivers | ‘Driver Current (mA) | Nominal Power (W) | INPUT VOLTAGE (V) | CURRENT (Amps) |
| 1 | 850 | 100 | 120 | 0.83 |
| 100 | 208 | 0.48 | ||
| 100 | 240 | 0.42 | ||
| 100 | 277 | 0.36 | ||
| 2520 | 100 | 347 | 0.29 | |
| 100 | 480 | 0.21 | ||
| 1 | 1200 | 150 | 120 | 1. |
| 150 | 208 | 0.72 | ||
| 150 | 240 | 0.63 | ||
| 150 | 277 | 0.54 | ||
| 2600 | 150 | 347 | 0.43 | |
| 150 | 480 | 0.31 | ||
| 1 | 4300 | 250 | 120 | 2. |
| 250 | 208 | 1.20 | ||
| 250 | 240 | 1. | ||
| 250 | 277 | 0.90 | ||
| 250 | 347 | 0.72 | ||
| 250 | 480 | 0.52 | ||
| 1 | 5200 | 300 | 120 | 2.50 |
| 300 | 208 | 1. | ||
| 300 | 240 | 1. | ||
| 300 | 277 | 1. | ||
| 300 | 347 | 0.86 | ||
| 300 | 480 | 0.63 |
EPA OF AREA LIGHT
| Item |
|
|
|
|
|
|
|
| 100W | 0.2751 | 0.5267 | 0.7321 | 0.6164 | 0.9577 | 0.9837 | 0.9577 |
| 150W | 0.3111 | 0.6343 | 0.6464 | 0.6222 | 0.9335 | 0.9696 | 0.9335 |
| 250W/300W | 0.4097 | 0.7227 | 0.9919 | 0.8856 | 1.1986 | 1.3049 | 1.1986 |
2 @90°
2 @120°
2@180°
3 @90°
3 @120°
4 @90°BUG
| SYSTEM WATTS | VOLTAGE | DIST.TYPE | B | U | G |
| 100W | 120-277V/347-480V | 3 | 2 | 0 | 2 |
| 4 | 2 | 0 | 3 | ||
| 150W | 120-277V/347-480V | 3 | 3 | 0 | 3 |
| 4 | 3 | 0 | 3 | ||
| 250W | 120-277V/347-480V | 3 | 4 | 0 | 4 |
| 4 | 4 | 0 | 5 | ||
| 300W | 120-277V/347-480V | 3 | 4 | 0 | 5 |
| 4 | 4 | 0 | 5 |
MOUNTING
- Standard versatile mounting arm accommodates multiple drilling patterns as well as square and round poles
- Optional for cast aluminum Slipfitter mounting adapter
Mounting Options
 |
 |
 |
 |
| Arm Mount (4″and 5″Square and Round poles) Standard versatile mounting arm is simple to install and can be used with existing poles for retrofit installations. |
Slipfitter Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2-3/8”O.D. horizontal steel tenon arm. |
Wall Mount Wall Mount is easy to install for direct wall mounting with 1/2′ conduit wiring or standard J-box mounting |
Yoke Mount Die-cast aluminum trunnion is easily adapted to many surfaces and allows easy fixture aiming angles. |
Mounting Dimensions
PHOTOMETRICS
Type 3 optics produce an asymmetrical pattern that directs the majority of the light forward and equally on both sides of the luminaire. In a back-to-back configuration, it creates a rectangular pattern which can extend pole spacings.
Type 4 is suitable for applications where light is primarily required forward with minimal backlight. Typical installations include perimeter poles.
Type 5 optics produce a symmetrical square distribution pattern that distributes light equally on all sides of the luminaire. Type 5 luminaires is universal for most area lighting applications
DIMENSION
unit: inch/mm
ORDERING GUIDE
Example: MAL05100W 27V XXK Y Y Y Y Y Y
Fixture Type |
Wattage |
Voltage |
CCT |
Finish |
Photocell (Option) |
Sensor (Option) |
Mounting |
Photometry |
Surge Protection (Option) |
| MAL05 Area Light Series |
100 100W | 27V 120-277V 48V 347-480V |
40K 4000K 50K 5000K |
D Dark Bronze B Black W White SG Silver Gray |
P0 120-277V Photocell P3 347V Photocell P4 480V Photocell Blank Without Photocell |
M With 120-277V Sensor Blank Without Sensor |
SQ Square Pole Mount SP Slipfitter Mount WM Wall Mount YK Yoke Mount |
T3 TYPE Ⅲ Photometry T4 TYPE Ⅳ Photometry T5 TYPE Ⅴ Photometry |
S Surge protection (Blank) No Surge protection |
Example: MAL05 150W 27V XXK Y Y Y Y Y
| Fixture Type |
Wattage |
Voltage |
CCT |
Finish |
Photocell (Option) |
Sensor (Option) |
Mounting |
Photometry |
Surge Protection (Option) |
| MAL05 Area Light Series |
150 150W 250 250W 300 300W |
27V 120-277V 48V 347-480V |
40K 4000K 50K 5000K |
D Dark Bronze B Black W White SG Silver Gray |
P0 120-277V Photocell P3 347V Photocell P4 480V Photocell Blank Without Photocell |
M With 120-277V Sensor Blank Without Sensor |
SQ Square Pole Mount SP Slipfitter Mount WM Wall Mount YK Yoke Mount |
T3 TYPE Ⅲ Photometry T4 TYPE Ⅳ Photometry T5 TYPE Ⅴ Photometry |
S Surge protection (Blank) No Surge protection |
ADDITIONAL MOUNTING ACCESSORIES
POLE BRACKET
- For mounting one fixture on an existing pole
 |
4″ Square Pole Mount with 2-3/8″ O.D. Tenon No. 4SQ-SP-D Finish: Dark Bronze USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. |
 |
4″ Round Pole Mount with 2-3/8″ O.D. Tenon NO. 4SQR-SP-D Finish: Dark Bronze USE: For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. |
 |
5″ Square Pole Mount with 2-3/8″ O.D. Tenon No. 5SQ-SP-D Finish: Dark Bronze USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. |
 |
5″ Round Pole Mount with 2-3/8″ O.D. Tenon NO. 5SQR-SP-D Finish: Dark Bronze USE: For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8″ hex head stainless-steel bolts. Vertical tenon measures 2-3/8″ O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. |
 |
Pole Bracket Accessories –Angle-Adjustment Adapter NO. SQA-ALDA Finish: Dark Bronze USE: Durable brackets are engineered to provide versatile mounting options. These arms are made from rugged die-cast aluminum. They allow optimal positioning of the light fixture to maximize the lighting effectiveness vertically and horizontally. |
 |
Pole Bracket accessories-Tenon & Yoke Adaptor NO. SP-TR-D Finish: Dark Bronze USE: The 2-3/8” OD Tenon Mount Adaptor for Yoke Fixtures is designed to mount light fixtures that are equipped with a yoke mount onto a 2-3/8” OD tenon. |
WALL BRACKET
- Attaches to any flat surface
- Provides wiring access
Mid-Pole tenon Bracket
 |
90° Wall Mount Bracket with 2-3/8″ O.D. Tenon NO. WM-SP-D Finish: Dark Bronze USE: The 90˚ wall mount bracket with 2-3/8″ tenon attaches a floodlight to almost any surface: wall, roof, or wood pole. Provides wiring access and built-in 2-3/8″ O.D. tenon to mount a fixture with our adjustable Slipfitter. Suggested 3/8″ diameter bolts for mounting. Mounting holes are spaced 3-1/4″ apart. |
 |
2-3/8” OD Horizontal Tenon Mid-Pole Bracket NO. SQ-SP-D Finish: Dark Bronze USE: 2-3/8” OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable Slipfitter onto a 2-3/8” OD horizontal tenon |
Round External Mount Horizontal Tenon
- To mount 2/3/4 fixtures on a existing pole
 |
Double 90‘ Horizontal Tenon Adaptor NO. R60-SP2-90-D Finish: Dark Bronze USE: The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally |
 |
Triple 120’ Horizontal Tenon Adaptor NO. R60-SP3-120-D Finish: Dark Bronze USE: The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally |
 |
Double 180‘ Horizontal Tenon Adaptor NO. R60-SP2-180-D Finish: Dark Bronze USE: The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally |
 |
Quad 90’ Horizontal Tenon Adaptor NO. R60-SP4-90-D Finish: Dark Bronze USE: The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally |
 |
Triple 90’ Horizontal Tenon Adaptor NO. R60-SP3-90-D Finish: Dark Bronze USE: The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally |
||