FLAT PLATEN (10”)
ASSEMBLY INSTRUCTIONS
| ITEM | DESCRIPTION | QTY | IMAGE |
| 1 | 1.5″ SQ TOOL ARM 14″ LG | 1 |  |
| 2 | PLATEN D PLATE | 1 |  |
| 3 | 1/2″ HEX BOLT 3”LG | 2 |  |
| 4 | 1/2″ CARRIAGE BOLT 2.5”LG | 2 |  |
| 5 | ½” THIN NYLOCK NUT | 3 |  |
| 6 | ½” TEFLON WASHER.020” THK | 1 |  |
| 7 | BLACK ADJUSTABLE HANDLE ½”-13 INTERNAL THREAD | 1 |  |
| 8 | ½” FLAT SAE WASHER | 2 |  |
| 9 | 10” FORMED PLATEN | 1 |  |
| 10 | 1/4” HEX BOLT ½” LONG | 2 |  |
| 11 | 5/16” SPACER 1/2″ ID1.0”OD | 2 |  |
| 12 | WEAR PLATE 10” X 2” | 1 |  |
| 13 | ¼” INTERNAL THREADBLACK ADJUSTABLE HANDLE | 2 |  |
| 14 | ¼” CARRIAGE BOLT 1” LONG | 2 |  |
| 15 | 2” IDLER WHEEL | 2 |  |
IF YOU HAVE ANY ISSUES WITH ASSEMBLY OR MISSING PARTS PLEASE CONTACT US IMMEDIATELY
Ben Secrist 513-532-7062, [email protected]
TOOL LIST
– ¾” COMBO WRENCH
– ¾” SOCKET AND RATCHET
– 7/16” COMBO WRENCH OR SOCKET
10” Platen Assembly
Place one teflon washer between arm and d-plate where the d-plate will rotate (red arrow). Install the platen d-plate with ½-13 x 2-1/2 carriage bolt, flat washer, and nylock nut on the short arm.
Make sure the holes in the d-plate are on the bottom. (green arrow)
Insert the ½”-13 x 2-1/2” carriage bolt into the slot and secure with ½-13 internal threaded adjustable handle.
Install the idler wheels into the platen d-plate using ½”-13 x 3” hex bolt, spacer, and nylock nut.
Be careful not to overtighten bearings. The wheel should spin freely but there shall not be extra space between the bearings and nut or bolt head.
Install the platen onto the platen d-plate using ¼”-20 threaded handles and ¼”-20 x 1” carriage bolts.
Install the wear plate to the flat platen using short 1/4” hex bolts. Align with belt on machine and tighten in place. Overtightening may strip the threads in the wear plate.