Bowers Wilkins ISW-6 Inbouw Speaker Instruction Manual

Home » Bowers Wilkins » Bowers Wilkins ISW-6 Inbouw Speaker Instruction Manual

Bowers-Wilkins-LOGO

Bowers Wilkins ISW-6 Inbouw Speaker

Bowers-Wilkins-ISW-6-Inbouw-Speaker-PRODUCT

Product Information

  • Model: CDA-4D
  • Part Number: FAX
  • Serial Number: 5555-0000001
  • MAC Address: XX:XX:XX:XX:XX:XX
  • Audio Amplifier: E496941

This device complies with part 15 of the FCC rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Made in Thailand.

Product Usage Instructions

  1. Make sure the device is connected to a stable power source.
  2. Position the device according to the provided cutting template.
  3. Securely attach the device using screws or other suitable fasteners.
  4. Connect any necessary audio inputs or outputs to the device.
  5. If using an internet browser, enter the following address: https://cda-4d_5555-000001.local
  6. Ensure the device is within range of a stable internet connection.
  7. Follow the provided instructions for operating the device.

PARTS

Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (1)

INSTALLATIONBowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (2) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (3) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (4) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (5) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (6) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (7) Bowers-Wilkins-ISW-6-Inbouw-Speaker-FIG-1 (8)

CONTACT

  • B&W Group Ltd.
  • Dale Road Worthing
  • West Sussex
  • BN11 2BH England
  • EU Importer:
  • Bowers & Wilkins
  • Beemdstraat 11
  • 5653 MA Eindhoven
  • The Netherlands

Copyright © B&W Group Ltd. E&OE
Pour en savoir plus: www.quefairedemesdechets.fr. Bowers & Wilkins will not be held responsible for any damage or injury caused by insecure installation. Installation must be carried out in accordance with national building and wiring regulations.

Leave a Comment