Contents
BN Products DC-20WH Electric-Hydraulic Rebar Cutter
Product Information
The DC-20WH is a heavy-duty portable, electric-hydraulic rebar cutter. It has a cutting pressure of 15 tons and can cut rebar up to #6 (3/4) diameter (Grade 60). It is spark-free and provides efficient cold-cutting. The cutter includes a safety relief valve for retracting the piston and a cutting guard as standard features. It comes with a carrying case, hydraulic oil, and a maintenance tool kit. Tune-up kits and replacement supplies are sold separately.
Product Usage Instructions
- Ensure that the cutter is placed on a stable and level surface.
- Connect the cutter to a suitable power source.
- Check the hydraulic oil level and add oil if necessary.
- Insert the rebar into the cutting area, ensuring it is positioned correctly.
- Press the cutting button to activate the cutter.
- Allow the cutter to complete the cutting process, which takes approximately 3 seconds.
- Release the cutting button and remove the cut rebar from the cutting area.
- After use, disconnect the cutter from the power source and store it safely in the carrying case.
If any maintenance or replacement parts are required, please contact BN Products-USATM Customer Service at 800-992-3833 or visit their website at www.BNProducts.com.
INSTRUCTION
- The DC-20WH is a heavy-duty portable, electric-hydraulic rebar cutter. This machine will safely cut rebar up to #6 (3/4”) diameter (Grade 60).
- The DC-20WH is a spark-free, efficient, cold-cutting shear that includes a safety relief valve for retracting the piston, and a cutting guard as standard features.
- The DC-20WH Rebar Cutter kit ships in a carrying case, and includes hydraulic oil and a maintenance tool kit.
- Tune-up kits and replacement supplies are sold separately.
SPECIFICATION
Maintenance Parts
- Maintenance parts and and replaceable components are available though BN Products-USA™ Distributors.
- If assistance is required, please contact BN Products-USA™ Customer Service at 800-992-3833.
Product Number/Description
- RB-20XH: Cutting Blocks – Set of two for DC-20WH
- RB-20WH/75: Cutting Blocks – Set of two “Grade 75” for DC-20WH
- TU20K: Tune-Up Kit – DC-20XH & DC-20WH
- BN7356: Hydraulic Oil (1 Quart)
Parts List
| No. | Old Part No. | New Part No. | Part Name |
| 1 | 1C2053000 | 1C2053000 | HOUSING |
| 2 | 1CM2002 | 74605000 | SEAL PACKING SKY35 |
| 3 | 1C1958 | 1C1958 | AIR BAG |
| 4 | 1CM2028 | 1CM2028 | AIR BAG SET BOLT |
| 5 | 1CM2027 | 1CM2027 | AIR BAG NUT |
| 6 | 1C4079400 | 1C4079400 | LOCK SPRING |
| 7 | 1C4160300 | 1C4160301 | STOPPER BOLT M12 |
| 8 | 1C1311 | 1C1311 | CUTTER BLOCK NO.2 |
| 9 | 1C1920 | 1C19201 | RETURN SPRING |
| 10 | 1C19171 | 1C3091900 | PISTON |
| 11 | 1C19362 | 7K1008035R2H | PISTON KEY |
| 12 | 1C1319 | 1C1319 | RETURN VALVE |
| 13 | 1C1921 | 1C1921 | RETURN VALVE SPRING |
| 14 | 1C1922 | 1C1922 | VALVE END SPRING |
| 15 | 1C3096300 | 1C3096300 | CYLINDER PACKING |
| 16 | 1C1918 | 1C1918 | SEAL PACKING |
| 17 | 1C2061500 | 1C2061500 | CYLINDER |
| 18 | 1C1326 | 7SRH027 | SNAP RING H27 |
| 19 | 1C1325 | 1C1325 | BEARING GUIDE |
| 20 | 1C13401 | 712NQ2410A | NEEDLE BEARING |
| 21 | 1CW0003 | 7698 | BALL BEARING 698 |
| 22 | 1C1327 | 1C1327 | RAM |
| 23 | 1C1330 | 1C1330 | RAM RETURN SPRING |
| 24 | 1C13281 | 1C13281 | DELIVERY VALVE |
| 25 | 1C1331 | 1C1331 | DELIVERY VALVE SPRING |
| 26 | 1C13352 | 1C13352 | SPRING GUIDE |
| 27 | 1C13292 | 1C13292 | PUMP HEAD SEAL |
| 28 | 3P1044 | 3P1044 | MAGNET FILTER |
| 29 | 1C1951G | 1C4194300 | PUMP CASE PACKING |
| 30 | 1C2059900 | 1C2059900 | PUMP CASE |
| 31 | 1C1342 | 7SC15257 | OIL SEAL SC15-25-7 |
| 32 | 1C1941 | 76004VV | BALL BEARING 6004VV |
| 33 | 1C1305 | 7WF10 | SEAL WASHER WF10 |
| 34 | 7B10015 | 7B10015 | OIL PLUG M10X15 |
| 35 | 1C2618 | 1C2618 | MAIN HANDLE |
| 36 | 1C1946 | 1C1946 | SWITCH COVER |
| 37 | 1C19612E | 7AR2049900-Y | ARMATURE ASS’Y |
| 38 | 1C1961D | 7HTK944535CB | STATOR COIL |
| 39 | 1C1961K | 7HTK971050B | MOTOR HOUSING |
| 40 | 1C1961J | 7HTK971001B | BRUSH HOLDER |
| 41 | 1C1961A | 7HTK999043B | CARBON BRUSH SET |
| 42 | 1C1961H | 7HTK935829B | BRUSH CAP |
| 43 | 7971055 | 7HTK971055B | SIDE COVER |
| 44 | 1C1961S | 7HTK971091B | TAIL COVER |
| 45 | 1C1961F | 1C1961F | CORD SET |
| 46 | 1C1961I | 7HTK940778B | CORD ARMOR |
| 47 | 1C1961B | 7HTK971390B | SWITCH |
| 48 | 7HTK310546B | 7HTK310546B | DUST WASHER |
| 49 | 1CL001N | 7HTK308283B | 1C1961L CONDENSER |
| 50 | 760002RU | 760002RU | BALL BEARING 6000VV |
| 51 | 7CB08025 | 7CB08025 | CAP BOLT M8X25 |
| 52 | 7SW005 | 7SW005 | SPRING WASHER M5 |
| 53 | 7CB05025 | 7CB205025 | CAP BOLT M5X25 |
| 54 | 7CB05018 | 7CB205018 | CAP BOLT M5X18 |
| 55 | 7P205055 | 7P205055 | PAN HEAD BOLT M5X55 |
| 56 | 7CB06090 | 7CB06090 | CAP BOLT M6X90 |
| 57 | 7CB06016 | 7CB06016 | CAP BOLT M6X16 |
| 58 | 7CB06018 | 7CB06018 | CAP BOLT M6X18 |
| 59 | 7P204008 | 7P204008 | PAN HEAD BOLT M4X8 |
| 60 | 7PB04015 | 7P204016 | PAN HEAD BOLT M4X16 |
| 61 | 7SS05008 | 7SS05008 | SET SCREW M5X8 |
| 62 | 7P204008 | 7P204008 | PAN HEAD BOLT M4X8 |
| 63 | 7P205010 | 7P205010 | PAN HEAD BOLT M5X10 |
| 64 | 1C4160601 | 1C4160601 | RELEASE VALVE |
| 65 | 7ORS4 | 7ORS4 | O RING |
| 66 | 1C4195900 | 1C4195900 | CUTTER GURAD |
| 67 | 1C1961PF | 7HTK971097B | ARMATURE FAN |
QUQUALITY PRALITY PRODUCTS ENGINEERED WITH INTELLIGENCE AND IMAODUCTS ENGINEERED WITH INTELLIGENCE AND IMAGINAGINATIONTION
Customer Service
- TELL: 800-992-3833
- WEB: www.BNProducts.com