blue built BBWMSE100B Wall Mount for Sonos Instruction Manual

Contents

blue built BBWMSE100B Wall Mount for Sonos

INSTALL SPEAKER STAND

On a high note

In the box

Wall mount
Speaker stand
Mounting plate
Screws
Plugs
Screws
Zip tie velcro
From your own toolbox
Cross-head screwdrivers
Pencil
Spirit level
Drill

CHECKLIST

Does the tick.

Suitable surfaces:
Wood
Drywall
Concrete
Brick

Do you have a question?
Coolblue.nl/en/customer-service

Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation. Not sure if you can do this yourself? Ask a professional installer.

INSTALLATION

STEP 1. Attach the base plate.
Place the mounting plate 3 on the speaker stand 2 and tighten the screws.
STEP 2. Place the speaker.
Place the speaker on the mounting plate 3 and tighten the screws at the bottom. Feed the cable through the hole in the mount.
STEP 3. Mark height.
With the spirit level, measure the height of the wall mount 1 . Make sure that the mount is straight. Mark the drill holes with the pencil.
STEP 4. Drill holes.
Wooden wall: drill a 3.5mm wide and 50mm deep hole and screw the wall mount 1 with the screws to the wall.
Stonewall: drill an 8mm wide and 50mm deep hole. Place the plugs 5 around the screws 4 and screw the wall mount 1 to the wall.
STEP 5. Attach the speaker.
Attach the speaker stand 2 to the wall mount 1 and optionally store away the cables with the zip tie 7 .
STEP 6. Adjust the speaker.
Tilt the speaker upwards or downwards or move it to the left and right. This way, you can adjust the sound to your liking.