BetaConnect BCRK5G Wireless Adapter For Android Auto User Manual

BetaConnect BCRK5G Wireless Adapter For Android Auto

Product Information

Specifications

• FCC ID: 2BBFK-BCRK5G
• Model: BCRK5G

Product Usage Instructions

Quick Start Guide

1. (Optional) Activate Android AutoTM using a USB cable first between your car and phone by granting all necessary permissions.
2. Download and install the BetaConnect App by visiting app.beta-connect.com or scanning the QR code on the back of this manual.
3. Install the BetaConnect device to your car’s USB port.
4. Follow the app instructions to register your device.
5. Enjoy wireless Android AutoTM in your car.

Device Status Indication
BetaConnect device has an LED next to its USB port to indicate the operating state of the device:

• Blinking Green: System initializing or installing the firmware.
• Blinking Blue: Ready to connect Android AutoTM.
• Solid Blue: Android AutoTM is running.

Restore to Factory Settings

1. Locate the Reset button on the bottom of the device.
2. With the device powered on, wait until the LED with the blinking blue light.
3. Use the pointed end of a paperclip or similar object to press and hold the Reset button for 5 seconds.
4. Wait for the device to fully reset and power on.

Important Product Information

• Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
• Do not expose your device to water or other liquids. The device is not waterproof.
• Do not disassemble the device. If your device needs service, please contact [email protected].
• Do not attempt to dry your device with an external heat source, such as a microwave oven or hair dryer.
• Clean your device only with a soft dry cloth.
• Do not use any harsh chemicals or solvents to clean the device.
• Do not expose the device to steam, extreme heat or cold, corrosive gases, vibrations, or very humid conditions.

Product Disposal Instructions
The cardboard box, the plastic contained in the packaging, and the parts that make up this product can be recycled by regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law. Instead, please be responsible and ask for disposal instructions from your local government.

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation of the Device is subject to the following two conditions: (1) the Device may not cause harmful interference, and (2) the Device must accept any interference received, including interference that may cause undesired operation.

If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQ

• Q: Is BetaConnect waterproof?
  A: No, BetaConnect is not waterproof. Do not expose it to water or other liquids.
• Q: How do I clean BetaConnect?
  A: Clean BetaConnect only with a soft dry cloth. Do not use any harsh chemicals or solvents.
• Q: Can I use BetaConnect in extreme temperatures?
  A: No, do not expose BetaConnect to extreme heat or cold.
• Q: How can I dispose of BetaConnect?
  A: Do not dispose of BetaConnect with your household waste. Please follow the product disposal instructions provided in this manual and ask for disposal instructions from your local government.

Quick Start Guide

1. (Optional) Activate Android Auto™ using a USB cable first between your car and phone by granting all necessary permissions.
2. Download and install BetaConect App by visiting app.beta-connect.com or scanning the QR code on the back of this manual.
3. Install BetaConnect device to your car’s USB port.
4. Follow the app instructions to register your device.
5. Enjoy wireless Android Auto™ on your car.

Device Status Indication

BetaConnect device has an LED next to its USB port to indicate the operating state of the device as below.

1. Blinking Green: System initializing or installing the firmware
2. Blinking Blue: Ready to connect Android Auto™
3. Solid Blue: Android Auto™ is running

Restore to Factory Settings

1. Locate the Reset button on the bottom of the device.
2. With the device powered on, wait until the LED with the blinking blue light.
3. Use the pointed end of a paperclip or similar object to press and hold the Reset button for 5 seconds.
4. Wait for the device to fully reset and power on.

Important Product Information

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

• Do not expose your device to water or other liquids. The device is not waterproof.
• Do not disassemble the device. If your device needs service, please contact [email protected].
• Do not attempt to dry your device with an external heat source, such as a microwave oven or hair dryer.
• Clean your device only with a soft dry cloth.
• Do not use any harsh chemicals or solvents to clean the device.
• Do not expose the device to steam, extreme heat or cold, corrosive gasses, vibrations, or very humid conditions.

Product Specifications

• Model Number: BCRK5G
• Dimensions: 2.8 × 1.8 × 0.4 in (70 × 46 × 10 mm)
• Operating Temperature: 32 to 95°F (0 to 35°C)
• Input Connector: USB-C
• Wi-Fi: 2.4Ghz / 5Ghz AC

Product Disposal Instructions

The cardboard box, the plastic contained in the packaging, and the parts that make up this product can be recycled by regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law. Instead, please be responsible and ask for disposal instructions from your local government.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation of the Device is subject to the following two conditions:

1. The Device may not cause harmful interference, and
2. The Device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If the Device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Warning
The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body.