41096089 Socket Outlet with LED Orientation Light
Instruction Manual
Best.-NRf. 67 6510 xx xx
Order no. 67 6510 xx xx
Socket outlet with earth contact pin and LED orientation light
Installation instruction
Contents
41096089 Socket Outlet with LED Orientation Light
Assembly of the device (Figure 1)
- Put the insert (7) into the flush-mounted box correctly positioned and fasten with screws or claws.
- Attach frame (4) of the appropriate switch range and the center plate (1).
- Carefully guide the center plate (1) with the plug contacts (3) into the contact sockets (6) without bending the plug contacts.
The notches (5) in the insert support the mounting device of the Centre plate via the centering pins (2). - Screw the center plate together with frame.
Functional test
- The light sensor (8) must be covered over a large area to switch on the LED orientation light.
Proper functional testing is only possible with sufficient ambient darkness.
Berker GmbH & Co. KG
Zoom Gunterstal
66440 Blieskastel/Germany
Tel.: + 49 6842 945 0
Fax: + 49 6842 945 4625
E-Mail: [email protected]
www.berker.com
02/2021 6LE007686A