Barkan SW310H Mobile TV Mount Cart
Contents
Important!
Warning! Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances. Opening the package represents your undertaking to closely read and follow the instructions. This product is not intended for use in public places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.com › Support › Safety Instructions & Warranty
For more information: barkanmounts.com
Safety Precautions
If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.
CAUTION This Mount is intended for use only with the maximum weight indicated. Using heavier products might cause injury.
CAUTION!
You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance.
WARNING! Barkan does not take responsibility for the installation and possible tip-over.
Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances. Opening the package represents your undertaking to closely read and follow the instructions. This product is not intended for use in public places.
For Safety Instructions, warranty and further information, go to: www.barkanmounts.com › Support › Safety Instructions & Warranty
This mount is intended for use only with the maximum weight as indicated on the box. Using heavier products might cause injury.
Safety Precautions
Warnings!
Tip Over Hazard!
Collision Hazard – place the product in a position that will prevent people from colliding with it
Release Wheel Brakes – do not lock more than 1 wheel
Keep children under the age of 15 away from the product
Anchor the product to the wall – using 2 strong cables
Do not place the product on inclined surfaces, at the edge of a surface or near stairs
Move Carefully – Release the wheel brakes, grasp the vertical bar with BOTH hands and move the
product slowly. Do not move the product by gripping the TV itself
Adjust the TV tilt angle carefully. Using excessive force might break the screen or tip over the product.
Main Parts
Included Hardware
not to scale
|
# |
M |
L |
L |
pcs |
|
Z1 |
4 | 20 |  |
4 |
|
Z2 |
6 |
16 |
|
4 |
|
Z3 |
6 |
25 |
1 |
4 |
| Z4 | 8 | 25 | 1 |
4 |
|
Z5 |
8 |
45 |
|
4 |
Required Tools
Connect the TV plate to the back of the TV
Assembly Instructions
- Continue according to your TV mounting hole pattern
1a 75×75 mm up to 100×100 mm hole pattern
1b Hole pattern 100×200 mm up to 400×400 mm:
Disassemble the screws, connect the 4 Adaptors to the TV Plate and reassemble the screws.
Position the Adaptors according to your TV’s hole pattern
Connect the TV Plate with the Adaptors to the TV in all 4 connection holes
- Connect the base beams. Long beam (Front) – long distance, short beam (Rear) – short distance
- Connect the wheels. Make sure they are locked.
- Connect the lower pipe (G) to the central base (D). Make sure that the cable hole is in the back.
- 1. Slide P10 to the bottom of the lower pipe.
2. Place P11 on the top of the lower pipe.
3. Place P12 (X2) on the connections between the beams.
4. Slide the upper pipe into the lower pipe. - Pass the cables through the pipes.
①② Adjust the stand to the desired height and connect the screws
- Place the plastic nut-housings (Z9), and then insert the nut (Z8).
- Weight test
Apply force on the upper part of the product and make sure it is assembled properly. - Connect the TV with the TV Plate to the Bracket
- Insert and tighten the screws from both sides to create friction for the tilt mechanism.
Adjust the TV tilt angle carefully. - Level the TV
BACK SCREEN CONNECTION POSITIONING OPTIONS
- 75×75, 100×100
- 200×100
- 300×200, 400×200,400×300
- 2oox200, 300×300
- 200×200,300×300
- 1oox200
- 200×200, 300×300, 300×400,400×400
- 300×200, 400×200,400×300
 |
www.barkanmounts.com/FAQ |