Contents
baby lock BLL-EF Embroidery Foot
Product Information
Baby Lock Sewing Accessories – Embroidery Foot (BLL-EF)
The Baby Lock Sewing Accessories – Embroidery Foot (BLL-EF) is an essential accessory for your Baby Lock sewing machine. It is specifically designed for embroidery purposes. The embroidery foot ensures smooth and precise stitching while protecting the needle and preventing any potential injuries.
Product Usage Instructions
- Raise the presser foot lever.
- Press the Needle Position button to raise the needle.
- Note: When attaching a presser foot, always press in the operation panel to avoid accidentally pressing the Start/Stop button and causing injury.
- Press the black button on the presser foot holder to remove the current presser foot.
- Use the included screwdriver to loosen the presser foot holder screw and remove the presser foot holder.
- Attach the embroidery foot U by aligning the presser foot holder screw with the notch in the foot. Ensure that embroidery foot U is installed vertically.
- Hold the embroidery foot in place with your right hand and securely tighten the presser foot holder screw using the included screwdriver. It is important to prevent any looseness, as it may cause the needle to strike the presser foot and result in injury.
- Press the appropriate button (specified on the screen) to unlock all keys and operation buttons. This will display the previous screen.
If you have any further questions or need assistance, please contact Baby Lock customer support at:
Phone: 800-422-2952
Website: www.babylock.com
Baby Lock
Sewing Accessories
Embroidery Foot
(BLL-EF)
Instructions
The Embroidery Foot was created as an embroidery foot replacement. If you have misplaced the foot included with your computerized Baby Lock embroidery machine, don’t worry – this is the foot you need.
INSTRUCTIONS
Note: When attaching a presser foot, always press in the operation panel. You may accidentally press the “Start/Stop” button and possibly cause injury. Be sure to use embroidery foot “U” when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury.
- Press the “Needle Position” button to raise the needle.
- Press
The Presser foot/Needle exchange screen appears and all keys and operation buttons are locked.
- Raise the presser foot lever.
- Press the black button on the presser foot holder to remove the presser foot.
- Use the included screwdriver to loosen the presser foot holder screw, and then remove the presser foot holder.
- Attach embroidery foot “U” so that the presser foot holder screw fits into the notch in the foot.
Make sure that embroidery foot “U” is vertical when it is installed. - Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw. If the screw is loose, the needle may strike the presser foot and possibly cause injury.
- Press , or
in the screen that appeared. All keys and operation buttons are unlocked, and the previous screen is displayed.