Portable Outdoor Camping Shower Set
CS01
Instruction Manual
Contents
CS01 Portable Outdoor Camping Shower Set
Thank you for purchasing our product. You have chosen a high quality product designed with the latest technology. In order to use our products better. Please read the instruction manual carefully.
Please check whether these accessories have been received, if any accessories are missing, please contact the sales.
| 1）Pump | 2）Water inlet | 3）Battery | 4）Switch |
| 5）Lighting | 6）Power output | 7）Charge port | 8）Power cable |
| 9）Connector | 10）Water pipe | 11）Holder&Hook | 12）Shower head |
OPERATING AND CHARGING
One-button switch control, press the button to turn on the pump L stall, press again the button to turn on the pump H stall. then press to turn off the pump. Press and hold the button for 3 seconds to turn on/off the lights.
Insert the charging cable with the output voltage of DC 5V into the battery charge port, the battery indicator light flashes red, the charging starts.
Only Charge This Device With A 5V Adopter. Do Not Charge It With An Adapter That’s More Than 5 Volts.
SPECIFICATION
Discharge protection current: 5A(MAX)
Low voltage alarm: 6.2-6.4V
Working Voltage: 7.4V
Working current:＜4A
Battery indicator Light: blue light when working, red light when the battery is low or charging.
Charging time: 2-4hours
Charging Mode: DC 5V USB
Charging current: 1-2A
Charging input voltage: 4.5V-5.5V
Working time: about 80 minutes
Battery capacity: 2200mAh
Water pipe: 1.8M
Pump size: diameter 45mm
ASSEMBLY STEPS
 |
 |
 |
|
Put an O-ling into the connector |
Screw on the shower head |
Power cable plug into the battery |
 |
 |
 |
|
After assembly it like this |
Holder & Hook use |
First put the pump into water then turn it on |
Note!
- Store the product in a cool, dry place when not in use.
- For long-time non-use, it’s recommend to fully charge once a month.
