AURA LIGHT Sevede RE RAMP
Contents
INSTALLATION INSTRUCTIONS
- Prepare luminaires.
- Move joint bracket to exact position. Secure with screws.
- a: Mount “Sevede RE Start” according to the manual for standard Sevede RE.
b: Mount “Sevede RE Mid” or “Sevede RE End”.
c: Mount “Sevede RE End”.
- Join luminaires mechanically with metal excenter lock. Connect the cable to terminal block.
- a: Cross section visualization. Attach inner profiles.
b: Keep inside cables away when mounting inner profile!
- After installation; move optics to centre, without any light gaps. Place “light traps” at each end. Applicable for opal and micro prismatic versions.
Note: The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Basic insulation between supply- and control-terminals (DALI).
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
CUSTOMERS SUPPORT
Aura Light AB, Sweden
Phone customer service +46 (0)20 32 30 30
[email protected], www.auralight.com
