PEIO
Spare Parts Customer Support
www.argos-support.co.uk 
0345 640 2020
[email protected]
0370 112 1928
Issue 1 – 20/04/22
Safety and Care Advice
Product Details
Peio cane 3Drw chest 2151744 Black
Peio cane 3Drw chest 3441013 Oak
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Make sure you have enough space to layout the parts before starting.
- This product has been constructed to be used in the domestic environment only and not for commercial purposes.
- Assemble the item as close to its final position(in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
- Parts of the assembly will be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
Care and maintenance
- Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
- Use a dry cloth to clean the product, furniture polish is not recommended.
- From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
- This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Additional Guidance
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightend properly.
- Maximum loading weight 50kg.
- This product is compliant EN14749,BS4875-7.
- Any additional or replacement parts are obtained from the manufacturer.
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
Fittings (Shown to scale)
Bag 1
(A) 
(B) 
Locking Nut x38 Metal Dowel x38
(C) 
(D) 
35mm Screw x 14 12mm Screw x 23
(E) 
(F) 
30mm Dowel x 18 15mm Screw x 2
(G) 
(H) 
Ø25mm Foot Pad x 4 Pad x 3
(I) 
(J) 
L Shap Bracket x 2 30mm Dowel x 6
Tools required
Phillips screwdriver (small & medium)
Phillips screwdriver (small & medium)
Pencil Mallet
Set Square Spirit Level
Ruler/tape measure Eye protection (when using a hammer or glue)
Power Drill Drill Heads
Ladder
Panels
[1] Top Panel x 1
(863x 383mm)
[2] Left Side Frame x 1 [3] Right Side Frame x 1
(813 x 360mm) (813 x 360mm)
[4] Rail (796 x 60mm) x 1
[5] Rail (796 x 60mm) x 2
[6] Rail (796 x 30mm) x 3
[7] Back Panel x 1 (815 x 375mm)
[8] Back Panel x 1 (815 x 375mm)
[9] Drawer Top Front x 1
(856 x 244mm)
[10] Drawer Middle Front x 1
(856 x 244mm)
[11] Drawer Bottom Front x 1
(856 x 244mm)
[12] Drawer Left Side x 3
(305 x 180mm)
[13] Drawer Right Side x 3
(305 x 180mm)
[14] Drawer Back x 3 (741 x 180mm)
[15] Drawer Rail x 3
(285 x 55mm)
[16] Drawer Bottom Panel x 3
(756x 298mm)
1
(B) (G)
Metal Dowel x34 Ø25mm Foot Pad x 4
(E) (J)
30mm Dowel x 18 30mm Dowel x 6
a) Peel off the back
(A) (B)
Locking Nut x38 Metal Dowel x38
(C) (D)
35mm Screw x 14 12mm Screw x 23
(E) (F)
30mm Dowel x 18 15mm Screw x 2
(G) (H)
Ø25mm Foot Pad x 4 Pad x 3
(I) (J)
L Shap Bracket x 2 30mm Dowel x 6
2
(B) (I)
Metal Dowel x4 L Shap Bracket x 2
(F)
15mm Screw x 2
3
(A)
Locking Nut x 8
4
(A)
Locking Nut x 8
5
(A)
Locking Nut x 4
6
(D) (H)
12mm Screw x 23 Pad x 3
7
(A)
Locking Nut x 15
8
(A) (C)
Locking Nut x 3 35mm Screw x 12
9
10
(C)
35mm Screw x 2
WARNING!
IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED
11
Assembly is complete.
A Guide to – Wall Mounting & Fixings
Important note:
Wall Fixings:
– because of the variety of different wall types, Habitat cannot provide you with the exact fixings you will need to fix this product to the wall.
You must first identify the type of wall you intend to fix product onto and then contact your local hardware store to get the appropriate fixings.
Important: When drilling into walls always check that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug if you are not sure.
2: Ensure you use the recommended drill bit to match the wall plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of walls
You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood.
No.1 “General Purpose” wall plug
Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general purpose wall plugs can be used.
No.2 “Plasterboard” wall plug
For use when attaching light loads on to plasterboard partitions.
No.3 “Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors.
No.4 “Cavity Fixing-Heavy Duty” wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks.
No.5 “Hammer Fixing” wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall.
No.6 “Shield Anchor” wall plug Heavy loads
For use with heavier loads such as TV & HiFi speakers and satelite dishes etc.
Care & Maintenance
Safety: Always check the fitting and location to ensure your safety in and around the home.
Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.