AR RMW Hollow Shaft Pump User Manual

Contents

AR RMW Hollow Shaft Pump

140° F – Max Water Temp
3/4” GHA – Inlet Thread
22mm x 14 M – Discharge Thread
2.2 oz – Oil Capacity

OVERVIEW

Note

SX Style – left-handed pumps have a hole in the leg opposite of the unloader.
Non-SX Style – Right-handed pumps have a hole in the leg on the same side as the unloader.

DIMENSION

SPECIAL PARTS / KITS

MOD

DESCRIPTION

LIST PRICE

AR43061	Complete Manifold – aluminum	$177.79
AR42142	EZ start kit	$11.34
AR42165	Inlet – with o-ring	$27.86
AR42166	Outlet – with o-ring	$13.09
AR42141	Grub screw and washer	$4.72
AR42125	Chemical injection kit	$8.96
AR46377	Complete Manifold RMW25G28	$379.06
AR64545	Oil (4.5 oz)	$15.47

REPAIR KITS

Product Specifications

Model: RMW
Type: Hollow Shaft Pump
Material: Aluminum Brass
Thermal Relief Valve: Included
Easy Start Valve: Included
Max Flow Rate: 193 l/min (51 gpm)
Max Pressure: 12 bar (174 psi)
Bore Diameter: 12 mm
Stroke: 12 mm
Crankshaft ID Stamp: Yes

Product Usage Instructions

Installation

Ensure the pump is securely mounted on a stable surface.
Connect the necessary hoses to the inlet and outlet ports of the pump.
Prime the pump by filling it with water before operation.
Check all connections for leaks before starting the pump.

Maintenance

Regularly check and clean the inlet and outlet ports.
Monitor the oil level and top up if necessary.
Inspect and replace any worn-out seals or O-rings as needed.

Troubleshooting

If the pump fails to start, check the power source and connections.
If there is a drop in performance, inspect and clean the valves and pistons.

Frequently Asked Questions (FAQ)

Q: How often should I change the oil in the pump?
A: It is recommended to change the oil every 3 months or after every 50 hours of operation, whichever comes first.

Q: What should I do if the thermal relief valve activates frequently?
A: Check for any obstructions in the system that may be causing excessive pressure buildup. Also, ensure the pump is not running dry.