Contents
AR RCV-F7 Hollow Shaft Pump
Product Information
Specifications:
- Model: RCV-F7
- Type: Hollow Shaft Pump
- Head Material: Brass
- Connecting Rods Material: Aluminum
- Version: +7
Product Usage Instructions
Key Features:
- Flow Rate: 8 l/min (2 gpm) at 150 bar
- Bore Diameter: 11mm
- Stroke: 15mm
- Crankshaft ID Stamp: 186
- Operating Pressure Range: 2200-2700 psi
- Engine Brake Horsepower: 11-15 ebhp at 2700 rpm
Assembly:
- Ensure all parts are clean and free from debris.
- Connect the aluminium connecting rods to the brass head securely.
- Verify the crankshaft ID stamp matches the recommended specifications.
Maintenance:
- Regularly check oil levels and quality.
- Inspect valves, pistons, water seals, oil seals, O-rings, and support rings for wear and tear.
- Replace worn-out parts with the specified repair kits when necessary.
Operation:
- Start the pump at a low pressure to prime the system.
- Gradually increase the pressure to the desired level for optimal performance.
- Monitor the pump for any unusual noises or vibrations during operation.
FAQ:
- Q: How often should I replace the oil in the pump?
A: It is recommended to change the oil every [X] operating hours or [Y] months, whichever comes first. - Q: Can I use hot water with this pump?
A: Yes, there is a special Hot Water Seal Kit available for use with hot water applications. Ensure proper installation for compatibility.
Commercial
- 140° F – Max Water Temp
- 1/2″ F – Inlet Thread
- 3/8″ F – Discharge Thread
- 9.81 oz – Oil Capacity
DIMENSION
D version + 7
PARTS / KITS
SPECIAL PARTS / KITS
REPAIR KITS
