Contents
Affine NVS100-SB07K-BH Slim Cloakroom Recessed Basin 400mm
This document provides instructions for the installation of a Slim Cloakroom Recessed Basin. Please follow each step carefully to ensure proper installation.
Specifications
| Component | Description |
|---|---|
| Basin Type | Slim Cloakroom Recessed Basin |
Preparation
- Before beginning the installation process, ensure that all necessary tools and materials are available and that the area where the basin will be installed is prepared.
Warning
- An illustration shows a warning sign indicating to take care during the installation process to avoid any injury or damage to the basin.
Mounting the Basin
- The diagram depicts the basin being aligned with the top of a vanity unit.
- Two hands are shown using tools to secure the basin from below.
- The dashed lines represent the correct positioning of the basin relative to the vanity unit.
Securing the Basin
- The image illustrates how to secure the basin onto the vanity unit.
- A hand is shown using a tool to tighten the fixation from the underside of the basin.
Finalizing the Installation
- Once the basin is securely fixed to the vanity unit, connect the plumbing (not shown in the diagram) according to the manufacturer’s instructions.
- Ensure all connections are tight and there are no leaks.
FAQ
- What tools are needed for installation?
- Typically, a wrench and a screwdriver are needed to secure the basin. Refer to the specific product’s installation manual for a complete list of tools.
- How do I ensure the basin is properly aligned?
- Use the dashed lines in the diagram as a guide to align the basin with the vanity unit. It should be centred and flush with the unit’s edges.
- What should I do if there is a leak after installation?
- Check all connections to make sure they are tight. If the leak persists, it may be necessary to apply sealant or contact a professional plumber.
Installation Instructions
- Slim Cloakroom Recessed Basin Installation Guide
