Contents
Tommee Tippee STRAW CUPS Instruction Manual
Product information for:
Please read and retain this important information for future reference.
INSTRUCTIONS FOR CLEANING VALVE CUPS
You should thoroughly clean your valve after each use.
DISASSEMBLE
- Un-screw the lid
- Pull out the valve
- Separate the 2 parts of the valve (soft & hard)
CLEAN
- Wash all parts thoroughly in warm soapy water and rinse in clear water
- All parts can be washed in the dishwasher (top shelf only)
- Always shake parts after washing to remove excess water and leave to air dry before reassembling
REASSEMBLE
- Align the two parts and press together
AS PER ILLUSTRATION
WARNING
- Ensure parts A and B of the soft side are pushed through the holes of the hard side. Ensure the cut B opens by squeezing before use.
- Place the valve back in the lid, and push until the sides lock into place
- Screw on lid
INSTRUCTION FOR CLEANING MEALTIME CUPS
You should thoroughly clean your valve after each use.
DISASSEMBLE
- Remove lid from cup base
- Grip lid and turn the locking connector anti-clockwise
- Separate locking connector, silicone disk, screw ring and lid top
CLEAN
- Wash all parts thoroughly in warm soapy water and rinse in clear water
- All parts can be washed in the dishwasher (top shelf only)
- Always shake parts after washing to remove excess water and leave to air dry before reassembling
REASSEMBLE
- Turn screw ring upside down and place silicone disk inside with grooves facing up
- Take the lid top and push down through the hole in the silicone disk
- Align locking connector and turn clockwise to lock
Place lid on base and align the 2 dots on the back – Remember: Do not over tighten.
Tommee Tippee STRAW CUPS Instruction Manual –
Tommee Tippee STRAW CUPS Instruction Manual –