Contents
e2S SON4L 10 Tone Alarm Sounder and LED Beacon
Product Information: 10 Tone Sounder & L.E.D. Beacon
The SON4L (factory ref) or MINITLLED (commercial ref) is a 10 tone sounder and LED beacon that operates on 12vdc, 24vdc, or 48vdc voltage range with a current of 50mA. It also operates on 24vac, 115vac, or 230vac with a voltage range of +/-10% or +/-25%. The unit has been tested to EN54-3 and is compliant with the Construction Product Directive 89/106/EEC. It has a sound output of >100dB(A)@1m and is sold subject to standard conditions of sale.
Product Usage Instructions
To use the SON4L/MINITLLED:
- Check the factory settings to ensure the correct alarm tone is selected for your country or application.
- To select a tone, place the pin link in the position shown in Fig. 1 of the manual.
- The unit can operate on DC or AC power depending on the voltage range selected.
- Connect the unit to the power source and ensure that the polarity is correct (+/-).
- The sounder and LED beacon will activate when power is supplied to the unit.
Note: The technical specification of this unit is subject to change without notice due to our policy of continual product development. All dimensions are approximate.
INSTALLATION
DIMENSION
SPECIFICATION
SON4L 24vdc unit is CPD Compliant. EN54-3 Type B IP55 Beacon is not compliant.
100dB(A)@1m
No liabil ity i s accepted for any consequence of the use of this document. The technical specification of thi s unit is subject to change wi thout notice due to our policy of continual product devel opment . All dimensions are approximate.Thi s uni t is sold subject to our standard condit ions of sal e, a copy of which is available on request.
Description 
- Tone selection. To select a tone place the pin link in the position shown above (Fig. 1).
NOTE: Please check factory settings and ensure the correct alarm tone is selected for your country or application.
Volume Control
tél 05 59 06 06 00
[email protected]