KEMIMOTO B1709-00501BK Gun Boot Bracket for ATV
Contents
BEFORE YOU BEGIN
- Please read the instructions carefully and verify that each item is in the list.
- Please retain these installation instructions for further reference and parts ordering information.
IMPORTANT
- Please read the installation instructions carefully before you start.
- If the vehicle is clean and free of other debris, it will be easy to install.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
PRODUCT INFORMATION
- Bracket A x1
- Bracket B x1
- Bracket C x1
- U-Bolt x3
- M8 Nut x8
- M8 Lock Nut x2
- M10 Lock Nut x2
- Velcro Strap x1
- Open End Wrench x1
INSTALLATION TIPS
- Install bracket A [1] to the rear rack with three U-bolts [4] and six M8 nuts [5].
- Install bracket B [2] on bracket A [1] with two M10 lock nuts [7].
- As shown in the figure, install the tool set and bracket C [3] in sequence on the bracket assembled in step 2 with two M8 nuts [5] and two M8 lock nuts [6].
- Secure the tool boot with velcro strap [8].
