hansgrohe Citterio 39200000 Single Lever Bidet Mixer Instruction Manual

Contents

hansgrohe Citterio 39200000 Single Lever Bidet Mixer

Product Information

The product is a shower system.
The product is available in multiple languages.
The product comes with installation instructions and technical data.
The product has a recommended operating pressure of 1.6 MPa.
The product is compatible with hydraulically and thermally controlled continuous flow heaters.
The product comes with spare parts and special accessories.
The product should only be used for bathing, hygienic, and body cleansing purposes.

Product Usage Instructions

Wear protective gloves during installation to avoid crushing and cutting injuries.
Ensure that the hot and cold supplies have equal pressures.
Do not use silicone containing acetic acid.
Recommended hot water temperature should be followed.
Refer to the flow diagram for installation.
Refer to the enclosed brochure for cleaning instructions.
Refer to the test certificate for more information.

Models

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The shower system may only be used for bathing, hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressures.

Installation Instructions

The fitting must be installed, flushed and tested after the valid norms.
If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C

Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.