Instructions for use
assembly instructions
Carlton
17455XXX
Contents
Safety Notes
⚠ Gloves should be worn during installation to prevent crushing and cutting injuries.
⚠ The shower system may only be used for bathing, hygienic and body cleansing purposes.
⚠ The hot and cold supplies must be of equal pressures.
⚠ Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
⚠ The product may not be used as a holding handle. A separate handle must be installed.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- The mesh washer must be insert to protect the overhead shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Technical Data
| Operating pressure: | max. 1 MPa |
| Recommended operating pressure: | 0,1 – 0,5MPa |
| Test pressure: | 1,6MPa (1 MPa = 10 bar = 147 PSI) |
| Hot water temperature: | max. 80°C |
| Recommended hot water temp.: | 65°C |
| Connections G 1/2: | cold right – hot left anti-pollution function |
Assembly
Maintenance non return valve
The non return valves must be checked regularly according to DIN EN 1717 in accordance with national or regional regulations (at least once a year).
Maintenance Sikaflex hose
Repeat cleaning when pull out becomes difficult.
Do not use silicone containing acetic acid!
Dimensions
Flow diagram
- Hand shower
- Bath Spout
Spare parts
XXX = Colors
000 = chrome plated
090 = chrome plated/gold plated
Operation
 open |
 close |
 cold |
 hot |
 |
 |
Cleaning
and enclosed brochure
Test certificate
| P-IX | DVGW | SVGW | ACS | WRAS | MCA | KIWA | |
| 17455000 | P-IX 8727/ICB |
Hansgrohe · Postrace 1145 · D-77761 SciTech·
Telecon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: [email protected] · Internet: www.hansgrohe.com