hansgrohe 14111XXX Talis Classic Basin Water Mixer Instruction Manual

Home » hansgrohe » hansgrohe 14111XXX Talis Classic Basin Water Mixer Instruction Manual

hansgrohe 14111XXX Talis Classic Basin Water Mixer

hansgrohe 14111XXX Talis Classic Basin Water Mixer

Safety Notes

Symbol Gloves should be worn during installation to prevent crushing and cutting injuries.

Symbol The shower system may only be used for bathing, hygienic and body cleansing purposes.

Symbol The hot and cold supplies must be of equal pressures.

Installation Instructions

  • The fitting must be installed, flushed and tested after the valid norms.
  • If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C

Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Symbol description

Symbol To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater.

Symbol Do not use silicone containing acetic acid!

Symbol Special accessories

special tool (58085000) order as an extra

Symbol Installation kit order as an extra

Symbol Assembly

Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly
Assembly

Symbol Operating Instruction

Symbol description
Symbol description

Symbol Dimensions

Talis Classic 14111XXX

Dimensions

Talis Classic 14116XXX

Dimensions

Talis Classic 14118XXX

Dimensions
Dimensions

Symbol Flow diagram

➀ with EcoSmart®
➁ without EcoSmart®

Talis Classic

14111XXX / 14118XXX

Dimensions

Talis Classic

14116XXX

Dimensions

Talis Classic 14120XXX

Dimensions
Dimensions

Talis Classic

14120XXX

Dimensions

Symbol Operation

  • open
    Operation
  • close
    Operation
  • cold
    Operation
  • hot
    Operation

Symbol Cleaning

The QuickClean cleaning function only needs a small manual rub over to remove the lime scale from the spray channels.
Cleaning

Symbol Spare parts

Spare parts

Symbol Test certificate

P-IX DVGW SVGW WRAS KIWA NF ACS ETA
14111XXX P-IX 18845/IA X X X X X
14116XXX P-IX 18845/IA X X X X X
14118XXX P-IX 18845/IA X X X X X
14120XXX P-IX 18845/IA X X X

Test certificate

Other Models

Talis Classic

14116XXX

hansgrohe 14111XXX Talis Classic Basin Water Mixer

Talis Classic

14120XXX

hansgrohe 14111XXX Talis Classic Basin Water Mixer

Customer Service

Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: [email protected] · Internet: www.hansgrohe.com

Logo

Leave a Comment