Contents
VEVOR Bucket Integral Digging Tooth
Product Overview
| The serial number | NAME | The length (mm) | teeth（PCS） | pin（PCS） | Bolt + nut（PCS） |
| 1 | 48 inch | 1200 | 6 | 6 | 4 |
| 2 | 60 inch | 1505 | 6 | 6 | 4 |
| 3 | 66 inch | 1657 | 7 | 7 | 4 |
| 4 | 72 inch | 18096 | 7 | 7 | 4 |
Product assembly instructions
- place the bucket motherboard according to the bucket size in bucket corresponding position, if there is a hole bucket on both sides of the edge, it shall, in accordance with the reserved hole position will bolt installation, product main board and bucket maintain tightness state (note: if there is no hole on the bucket, it should be according to the products are mainly on the holes punched on the bucket, then to product for installation).
- place the tooth one by one according to the position of the tooth root on the mainboard for installation;
- put the pin in accordance with the reserved holes on the tooth one by one, need to use a hammer to knock into the hole, ensure that the pin is complete into the hole, ensure the installation and assembly of the tooth and bucket;
- Assembly is complete.