hansgrohe 41616000 Logis C Bath Towel Holder Instruction Manual

Contents

hansgrohe 41616000 Logis C Bath Towel Holder

Product Information

The product is a Logis C handle with different model numbers (41611XXX, 41613XXX, 41616XXX, 41617XXX, 41615XXX, 41612XXX, 41623XXX, 41614XXX, 41618XXX, and 41626XXX) that come in different colors (000 = chrome plated, 820 = brushed nickel). The product comes with installation instructions and safety notes. The handle is intended for general private use and not for physically impaired persons. It is not a medical product. The handle should be used for support only and not the remaining products.

Product Usage Instructions

During installation, the contractor should ensure that the wall area where the mounting plate is to be fitted is flat with no projecting joints or tiles sticking out. The wall structure should also be suitable for the product installation with no weak points. The screws and dowels enclosed are only suitable for concrete. For other wall constructions, the dowel manufacturer’s indications should be taken into account. Gloves should be worn during installation to prevent crushing and cutting injuries. The installed products’ proper attachment and tight seating should be checked periodically (annually).

To fill and clean the product, the pump and cover should be removed. The enclosed brochure provides instructions on cleaning. Do not use silicone containing acetic acid. The glass could be of a different size as illustrated due to it being blown by mouth.

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
Intended use of the handle 41613XXX: The handle is not a medical product, it is not intended for physi-cally impaired persons, but only for general private use.
Use only the handle for support, the remaining prod-ucts are not intended to be used as supports.
Check the proper attachment and tight seating of the installed products periodically (annually).

Installation Instructions

Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.