MPPT Solar Charge Controller
M1210P
User Manual
Reminder: The controllers can be installed indoor only.
Contents
Main Feature
- 10A MPPT solar charge controller with portable design.
- 3-stage charging optimizes battery performance.
- Suitable for battery types such as vented GEL、AGM and LiFePO4.
- LCD shows Battery Voltage and Charge Current,etc .
- LED inducts Battery Soc、Charging Sta and Battery type.
- User-friendly key press operation, more simple and easier.
- Easy to be mounted.
- Overcharge、Over-temperature、Reverse Polarity Protection.
Warning and Caution
- Designed for 12V batteries, do not connect to higher voltage batteries.
- The PV Voc cannot exceed 35V
- Use within rated power and voltage range
- Avoid placing solar panels in partially sunny or shaded environments
- Keep controller away from water
- Keep controller in an environmental temperature from – 20ºC~+55ºC. Avoid direct sunlight.
- Keep good heat dissipation.
Product Dimension
Installation
Wire Dimension
- Accessories
- Controller
Key Operation
| Function Key | System Mode | Operation | Operation Indication |
 |
(LCD only) | Long Press | Enter Set Mode |
| Short Press | Screen Page Switch | ||
| Set Mode (Battery LED only) |
Long Press | Exit Set Mode And Save | |
| Short Press | Edit Battery Type |
LCD Display Indication
Error Code
| Code | Error |
| E00 | No Error |
| E01 | Over-Discharge |
| E02 | Battery Over Voltage |
| E06 | Device Over Heating |
| E10 | PV Over Voltage |
| E13 | Solar Reverse Polarity |
| E14 | Battery Reverse Polarity |
LED Display Indication
1) Battery SOC Indication
| SOC | 25% | 50% | 75% | 100% |
| Bat Volt | 11.6V | 12.1V | 12.6V | 13.2V |
Float Fashing
Steady On
| SOC | Charging State | LED1 | LED2 | LED3 | LED4 |
| <25 | Charging | |
|
|
|
| Idle | |
||||
| <50 | Charging | |
|
|
|
| Idle | |
|
|||
| <75 | Charging | |
|
|
|
| Idle | |
|
|
||
| >75 | Charging | |
|
|
|
| Idle | |
|
|
|
2) Battery Type Indication
| System mode | Describe | |
| View Mode | |
The current battery type is selected |
| Set Mode | |
| Abbreviations | Battery Types |
| GEL | GEL Battery |
| AGM | AGM Battery |
| LiFePO4 | Lithium iron phosphate battery |
| Equalize Charge Voltage (7 days cycle) | GEL | 14.6V |
| AGM | – | |
| LiFePO4 | – | |
| Boost Charge Volt. | GEL | 14.2V |
| AGM | 14.4V | |
| LiFePO4 | 14.4V | |
| Float Charge Volt. | GEL | 13.8V |
| AGM | 13.8V | |
| LiFePO4 | – |
| Parameter | 12mA |
| No-load Loss | Value |
| Max Solar Input Voltage | <30Voc |
| Rated Solar Charge Current | 10A |
| Max Solar Input Power | 150W |
| Operating Temperature | -35ºC~+45ºC |
| IP Protection | IP45 |
| Net Weight | 110g |
| Operating Altitude | ≤3000 meters |
| Controller Dimension(mm) | 96.4*61.6*27 |