Contents
PHYN Smart Home Water Leak Detector
Product Information
The product is a device manufactured by Phyn LLC that requires proper installation for optimal functioning. Failure to follow the installation instructions can result in a malfunctioning or leaking device and void the manufacturer’s arranty. The device operates on 110-220V with a maximum power consumption of 15W. It has a flow direction indicator, and adapter fittings may not be included. The device has a Pmax of 10 bar and Cv of 8.5 gpm.
Product Usage Instructions
- Ensure that the device is installed following the manufacturer’s installation instructions to avoid malfunctions or leaks.
- The device operates on 110-220V with a maximum power consumption of 15W.
- Use an NPSM threaded fitting to connect the device properly.
- Ensure that the device is at least 12 inches (30 cm) away from the floor.
- Refer to the flow direction indicator on the device to ensure proper installation.
- Note that adapter fittings may not be included and should be obtained if required.
Warning!
Failure to follow installation instructions may lead to an improperly functioning or leaking device and voidmanufacturer’s warranty. See full warranty terms on local Phyn webpage.
Dimension
Overview
Installation
©2021 Phyn LLC. Phyn is a trademark of Phyn LLC. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Phyn LLC
1855 Del Amo Blvd
Torrance, CA, USA 90501
Engineered in Torrance, CA
Assembled in Mexico