HOME AMC 30 Inch Aluminium Medicine Cabinet
Instruction Manual
Contents
AMC 30 Inch Aluminium Medicine Cabinet
- Mirror diagram
- Tools required
Two persons required for correct installation
Before Installation
- Please read these instructions carefully before installation.
- Installation should be only carried out by a qualified professional.
- ENSURE THAT ELECTRICAL CONNECTIONS ARE TURNED OFF AT THE CONSUMER UNIT OR FUSE BOARD BEFORE INSTALLING OR CARRYING OUT ANY MAINTENANCE.
- Please take note of the Tools Required prior to commencement of any installation procedures.
- Follow the Installation Steps on Page 2 to ensure that the correct installation method is adhered to. Please also read all operating and safety instructions before commencing any installation to ensure complete understanding of the installation procedure.
- All information provided by these guidelines are based on the latest technical product information. We reserve the right to change the product characteristics, packaging or supply without prior notice.
- These guidelines include maintenance and cleaning advice.
- THIS PRODUCT IS FOR INDOOR USE ONLY.
WARNING: There may be hidden dangers to people or product during installing. In order to avoid trapping fingers, please pay attention to the open and closed door position.
WARNING: Do not use any acidic or alkaline cleanser or alcohol on this product. Please clean with a damp soft cloth.
WARNING: Keep away from water and electricity when hanging on wall.
IMPORTANT: This product is a one-way hanging mirror. Please make sure that there are no obstacles (i.e. electrical cable/water pipework) inside the wall before commencing installation procedure.
WARNING: This product is fragile – it should be installed by a professional person with suitable protective equipment, as listed in the Tools Required above.
Material Statement
Mirror cabinet 1pc- Side panel 2pcs
- Holder 4pcs
- Upper bracket 3pcs
- Bottom bracket 1pc
- ST4*35 screw 6pcs
- Wall plus 6pcs
- Screw cap 6pcs
- ST4*8 screw 4pcs
- Cover plate 1pc
Installation Steps Hanging installation
- Mark holes based on the desired location, then drill holes and fix mount ing bar on the wall
• STEP 1
- Put the cabinet on the mounting bar, insert the top clips on the top of cabinet, fix it with screw
• STEP 2
- Insert side kits as picture
• STEP 3
- Adjust door position accordingly.
• STEP 4