FGI-2087C35-TR Cheverly Vintage Gray Oak Multiple Storage TV Tower
Instruction Manual
Contents
FGI-2087C35-TR Cheverly Vintage Gray Oak Multiple Storage TV Tower
TOOLS REQUIRED 
Assembly rating
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and accessories listed on Page 6 are accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then!
Prep Time!
Please review the assembly instructions and all diagrams prior to assembling. Arrange parts as recommended on Page 7 and group identical hardware together to make assembling easier.
PRE ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. 
Teamwork
ALWAYS have at least two people to help with transporting and U assembling the product to avoid potential injury and/or damage. 
Suitable Location
Assembling near the area of the intended location is highly recommended. 
Sufficient Space Make sure you have enough space to move around during the assembly. 
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to prevent scratches.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. 
Position each part correctly and insert screws or bolts into their respective holes. 
Use the appropriate hand tools or power tools for assembly.
Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. 
Save the instructions and store any supplied tools for later maintenance. 
After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Note : Every cam lock bolt must have a cam (Sa ay) lock connector in order to fasten the 2 parts together. 
- Screw the cam bolt into panel.
- Insert the cam bolt into the bolt hole of joint panel.
- Align the cam lock with its side opening (or arrow) pointing to cam bolt.
- Turn the cam lock clockwise gently until it will not turn any more.
TV TOWER 
- Please keep instructions for future reference.
- Check the quantity and irregularity of parts and ay hardware before you start.
PARTS 
HARDWARE 
ACCESSORIES 
GET READY
Please group boards as below. 
ASSEMBLY INSTRUCTIONS
- Hardware (1) x 2PCS
Hardware (3) x 2PCS
Accessory (A7) x 1PC
- Part L x1PC
Part M x1PC
Part N x1PC
Part O x1PC
Part P x1PC Hardware (2) x 2PCS
- Hardware (1) x 8PCS
Hardware (3) x 27PCS
Hardware (7) x 1PC
Accessory (A7)x 1PC
- Hardware (9) x 1PC
Hardware (0 x 1PC
Accessory (A4)x 1PC
Accessory (A5)x 1PC
- Part B x1PC
Part C x1PC
Part H x1PC
Part I x1PC
Part J x1PC
Hardware 2 x 4PCS Accessory (A7)x 1PC
- Part Q x1PC
- Part G x1PC
Hardware 4 x 4PCS
- Accessory (A1)x 4PCS
Accessory (A2)x 16PCS
- Accessory (A3)x 4PCS
- Part E x2PCS
Hardware x 4PCS
Hardware (2)x 6PCS
- Part F x1PC
Hardware (4)x 4PCS
- Part A x1PC
Part D x1PC
Hardware 4)x 4PCS
Hardware 5)x 4PCS
Accessory (A8)x 1PC
- Hardware 2)x 4PCS
- Accessory (A6)x 6 SETS
- Accessory (AQ)x 1PC
Accessory A10 x 1PC
Accessory A11 x 1PC
Accessory A12 x 1PC
Accessory A 13 x 2PCS
Accessory A 14 x 1PC
- Hardware 11)x 2PCS
- Hardware (8)x 1PC
Optional: You can have the door open from the left side or the right side. Please ensure that once the doors are locked in place, you may not remove the door to fit it the other way around.
- ASSEMBLY COMPLETED
Please ensure the furniture rests on an even and flat surface. if the product wobbles or feels loose, double-check all bolts and/or screws are properly tightened and secured.
Keep this handy!
Please retain this instruction manual and any order-related information for future reference. (V)
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting of adjusting the placement.