LENKENG LKV724P 1×4 HDMI Splitter With Extender User Manual

LENKENG LKV724P 1×4 HDMI Splitter With Extender

Important Safety Instructions

1. Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
2. Place the device in a well-ventilated area, do not block any ventilation openings.
3. Do not expose this apparatus to rain or place it near water. Any liquid that goes into the apparatus may cause a failure, fire, or electric shock.
4. Do not place the device on an uneven or unstable surface. The device may fall resulting in a malfunction.
5. Never insert anything metallic into the open parts of this apparatus.
   This may cause a danger of electric shock.
6. If a three-party power supply is used, please ensure that the power supply specifications meet the product requirements.

Introduction

This product is a 1 input 4 outputs splitter extender kit, It distributes 1 HDMI input signal to 4 identical signal outputs, extends these signals up to 70 meters. support 4K30Hz resolution, bi-directional IR passthrough, RS-232 control and 3.5mm L/R audio output functions.
It is suitable for outdoor advertising, studios, multimedia classrooms, etc.

Features

1. Zero-latency transmission.
2. Support up to 4K@30Hz resolution, downward compatible.
3. Support HDR10.
4. Distribute 1 HDMI source to 4 HDMI displays.
5. Support CAT6/6A/7 network cable, which can transmit 1080p signal up to 70 meters and 4K30Hz signal up to 40 meters.
6. Support power over network cable, only the transmitter needs to be powered.
7. The transmitter support HDMI loop out.
8. Support bi-directional IR passthrough(20~60KHz).
9. Support RS-232 command control.
10. Surge Protection, Lightning Protection, ESD Protection.

Package Contents

• Transmitter x1
• Receiver x4
• User manual x1
• DC12V/2A x 1
• IR receiver extension cable x 4
• IR blaster extension cable x 1
  
• Terminal block (RS-232) x 1
  
• Mounting ear x 2
  
• Screw x8
  

Installation Requirements

Item	Description	Requirement
Signal source	Devices with HDMI port (PC, DVD, NVR, etc.)	HDMI cable ≤5m
Cable	CAT6/6A/7，following standard IEEE-568B	CAT6/6A/7≤70m
Display device	TV, projector, etc. with HDMI port	HDMI cable ≤5m

Panel Description

Transmitter (TX)

①	Reset button	Press to restart the device
② ③	RJ45 signal output HDMI signal output	Connect with CAT6/6A/7 network cable Connect with HDMI display device
④	HDMI signal input	Connect with HDMI source
⑤	Power input	Connect with DC12V/2A power adapter
⑥	Power indicator	a. When power is on and no HDMI signal is transmitted, the indicator flashes b. When power is on and HDMI signal is transmitted, the indicator is always on
⑦	IR in	Connect with IR receiver extension cable
⑧	IR out	Connect with IR blaster extension cable
⑨	RS-232	Connected to a control device (like computer), input control commands for management

Receiver (RX)

①	Reset button	Press to restart the device
②	RJ45 signal input	Connect with CAT6/6A/7 network cable
③	IR in	Connect with IR receiver extension cable
④	IR out	Connect with IR blaster extension cable
⑤	Power indicator	a. When power is on and no HDMI signal is transmitted, the indicator flashes b. When power is on and HDMI signal is transmitted, the indicator is always on
⑥	Power input	Connect with DC5V/1A power adapter (No need to connect to power when the transmitter is powered)
⑦	3.5mm L/R out	Connect headphones or power amplifiers to output stereo audio
⑧	HDMI signal output	Connect with HDMI display device

Installation Procedures

Connection Diagrams

Connection Instructions

1. Connect the source device to the HDMI IN port of the transmitter with an HDMI cable, and connect the HDMI OUT port of the receiver to the display device with another HDMI cable.
2. Use a Cat6/6A/7 cable to connect the RJ45 port of the transmitter and receiver.
3. If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
4. If using IR passthrough, the IR blaster extension cable should plug in the IR OUT port, the IR receiver extension cable should plug in the IR IN port.
5. If you need to output audio additionally, connect the speaker to the L/R port of the receiver with a 3.5mm stereo audio cable.
6. If you need to use RS-232 command control, connect the RS-232 port to the control device.
7. Plug the power supply into the devices to get started.

IR User Guide

1. Power
2. IR Signal
3. Null
   

 

1. Power
2. IR Signal
3. Grounding
   

 

1. IR blaster extension cable should plug in the IR OUT port of the transmitter or receiver, IR receiver extension cable should plug in the IR IN port of the transmitter or receiver.
2. The emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
3. Point the remote control at the receiving head of the IR receiver extension cable to operate.

RS-232 SETTING

Baud rate: 9600
Data bits: 8
Stop bits: 1
Parity: none

Control Commands	Function Descriptions
ES XX On【Enter】	Turn on the network signal output port(s), choose from “01” to “04”(the network ports from left to right are: 01, 02, 03, 04) “All” means all four ports
ES XX Off【Enter】	Turn off the network signal output port(s), choose from “01” to “04” (the network ports from left to right are: 01, 02, 03, 04) “All” means all four ports
Reset【Enter】	Restart the device
Recover【Enter】	Restore device factory settings
Baud XX 【Enter】	Set the baud rate value: 9600 (default), 19200, 38400, 57600, 115200
Examples of control commands are shown below:
Control Command 1	ES 04 On【Enter】
Function Description	Turn on network signal output port 04
Return Values	Received successfully	ES 04 On OK
	Receive failed	ES 04 On FAIL
Control Command 2	ES All Off【Enter】
Function Description	Turn off all the network signal output ports
Return Values	Received successfully	ES All Off OK
	Receive failed	ES All Off FAIL
Control Command 3	Reset【Enter】
Function Description	Restart the device
Return Values	Received successfully	Reset OK
	Receive failed	Reset FAIL
Control Command 4	Baud 19200【Enter】
Function Description	Set the baud rate value：19200
Return Values	Received successfully	Baud 19200 OK
	Receive failed	Baud 19200 FAIL

Note that you need to press the ‘Enter’ key to send the control command.

FAQ

Q: Why there is no image output on the display device?
A: 1) Please check the power supply and all the cables are well-connected.
2) Please check whether there is an HDMI signal input.
3) Please make sure that the corresponding network port output is not turned off by the RS-232 command.
Q: Why is the output image unstable?
A: 1) Please check whether the length of the network cable is within the specified range.
2) Press the “reset” button on TX or RX to restart and reconnect.
Q: Why does the TV have a snowy/fuzzy screen?
A: 1) Change to a better quality or shorter HDMI cable, the recommended length of HDMI cable is less than or equal to 5 meters.
2) Try another network cable and make sure that the length is within the specified range.

Technical Parameters

Item		Specification
Mode		1 input, 4 output
HDMI Performance	Compatibility	HDMI 1.4，HDCP1.4
	Resolution	800×600、1024×768、1280×720、1280×960、 1366×768、 1440×900、1680×1050、1920×1080 480i@60Hz、 480p@60Hz、576i@50Hz、 576p@50Hz、720p@50/60Hz、1080i@50/60Hz 1080p@24/25/30/50/60Hz、4K@24/25/30Hz
	Audio Formats	PCM、LPCM、DTS-HD、DTS-Audio
Transmission distance	CAT6/6A/7	1080p@60Hz≤70 meters 4K@30Hz≤40 meters
IR Passback	Bi-directional IR passback (20-60khz)
RS-232	3Pin：GND-RxD-TxD，follows RS-232 levels Default baud rate：9600
Operating Environment	Working temperature	-20~60℃
	Storage temperature	-30~70℃
	Humidity	0~90% RH
Protection	ESD protection 1a Contact discharge level 2 (±4KV) 1b Air discharge level 3 (±8KV) Implementation of the standard: IEC61000-4-2
	Lightning protection
	Surge protection
Power	Supply	TX: DC12V/2A RX: DC5V/1A
	Consumption	TX＜10W RX＜2.5W
Physical Properties	Housing	Iron
	Color	Black
	Weight	TX: 435g RX: 160g x4
	Dimensions	TX: 191.5(L) x 96.5(W) x 19.0(H)mm RX: 75.0(L) x 80.0(W) x 18.0(H)mm

Disclaimer

The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.