Product End of Life Instructions
VARIABLE SPEED DRIVE ATV630 IP55 5,5KW 400/480V
DISCONNECT SWITCH
Altivar Process ATV600/900
Contents
Introduction and Scope
| Legal information | This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and materials of the product. | |
| Purpose | This document is intended for use by professional end of life recyclers or waste treatment facilities. It provides the basic information for proper end-of-life treatment of product components and materials. | |
| In case of special transportation: transportation method |
No special tranportation. | |
| Recyclability potential | 83% | Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME). |
Safety Information
The information provided in this document assumes that the product is completely de-energized and uninstalled (refer to the instructions provided in the appropriate product manuals).
Dismantling/disassembling the product may entail hazards caused by, for example, sharp edges, chemical aggression or ejected parts.
WARNING
HAZARD DUE TO INSUFFICIENT PROTECTION
- Implement all safety measures required by the applicable regulations and by the processes used to dismantle/disassemble and dispose of the product.
- Use all necessary personal protective equipment such as gloves and goggles. Failure to follow these instructions can result in death or serious injury.
End of Life Instructions
| Recommendation | Number ondrawing | Component / Material | Weight (in g) | Comment |
| To be depolluted | 1 | Electronic Board (Power and Communication) > 10cm² |
781 | |
| To be depolluted | 2 | LCD and all those back-lighted with gas discharge lamps |
25 | |
| To be depolluted | 3 | Other battery | 2,9 | Lithium content: 0,07 g |
| To be depolluted | 4 | Cable (high current) | 405 | |
| To be depolluted | 5 | Electrolyte capacitors which size: height > 25 mm, diameter > 25 mm or proportionately similar volume |
175 | Bar |
| To be dismantled | 6 | Steel | 5240 | Bar, Ground plate, Support |
| To be dismantled | 7 | Aluminium | 498 | Heatsink |
| To be dismantled | 8 | PC, ABS-PC, PA, PA6, HDPE, SAN with or without additive, PP+EPDM and PP |
4219 | Housing, Chassis, cover |
| To be dismantled | 9 | Copper | 25 | Bar |
| Other | 1089,1 |
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
| Brand name | Schneider Electric |
| Representative product | VARIABLE SPEED DRIVE ATV630 IP55 5,5KW 400/480V DISCONNECT SWITCH – ATV650U55N4E |
| Product function | The main function of the Altivar Process product range is the speed control and variation of a synchronous, asynchronous or reluctance electric motor for fluid management and industrial applications. |
| Description of the range | This range consists of products Altivar 650 and Altivar 950 with ratings from 0,75 to 11 kW for operation on 400V/480V, 3-phase supplies IP55. |
| Total representative product mass | 12460 g |
| Representative product dimensions | 678 mm x 264 mm x 300 mm |
| Accessories | No accessories needed. |
| Date of information release | Nov-21 |
Schneider Electric Industries SAS
Country Customer Care Center
https://www.schneider-electric.com/contact
35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVPEP1508009_V3
Published by Schneider Electric
© 2021 – Schneider Electric – All rights reserved