SNEP Mode P Linear High Quality Light Installation Guide

Home » SNEP » SNEP Mode P Linear High Quality Light Installation Guide

SNEP - logoMode P Linear High Quality Light
Installation GuideSNEP Mode P Linear High Quality Light

Mode P Linear High Quality Light

Keep the instructions andhand them over to the user of the property.
Safety Instructions
Check the products for transpoint contents and damage. If you notice any defects or shortcomings in the delivery or in a products please contact the seller immediately.
The luminaire must be disconnected from the mains before installation or maintenance work to-avoid the risk of electric shock.

  • The luminaire does not come with a terminal block. The installation or maintenance of the luminaire should only be carries out by an authorizen person in accordance  with these instructions
  • The light source of the luminaire may only be replaced by manufacturer, a person authorized by him or an equivalent qualified person.

Instruction

  • No changes may be made to the product
  • The manufacturer is not reponsible for misure of the product
  • The installed product must not be subjected to external mechanical stress
  • The installed product must not be exposed to strong chemicals
  • Do not look directly at the lumaire that is on

Service instructions

  • If necessary, use neutral soap solutions and non-abrasive cleaners to clean the luminaire Storage
  • The product is stored in a dry and clean environment
  • Do not strain the product mechanically or chemically during storage

Brackets:
Use the brackets that came with the shipment only if they are suitable for the intended purpose. If the fasteners are included in the order, they are packaged separately. Please  note that for partial shipments, mounts may only be included wits thefirst delivery batch.
The number of fasteners must be used according to the instructions.
Note! When installing sports facilities, one piece/luminaire should be added to the number of brackets used.

Brackets Surface or suspension rail installation  Ramp installation
Mode P02 2 2
Mode P04 2 2

SNEP Mode P Linear High Quality Light - Figure 1

Surface mount

SNEP Mode P Linear High Quality Light - Figure 2

Suspension rail installation

SNEP Mode P Linear High Quality Light - Figure 3

Ramp installation

SNEP Mode P Linear High Quality Light - Figure 5

Coupling

SNEP Mode P Linear High Quality Light - Figure 6SNEP Mode P Linear High Quality Light - Figure 7

Coupling

The connection must be made according to the room protection rating and, if necessary, using a distribution box that provides the required protection rating. When the  luminaire is equipped with preassembled connection cable, one cannot open the luminaire nor change the cable.

Terminal block 3-phase DALI Wire color
2 L2 DA- / 2 black
1 L1 L Brown
Yellow-green
N N N Blue
3 L3 DA+ / 1 Gray

NOTE!
Basic insulation must be maintained between the mains voltage omponents and the DALI control circuit. (IEC60598-1: 3.3.22)SNEP Mode P Linear High Quality Light - Figure 8

Connection and cable types

MSK / PVC / HO5VV-F White Indoor use
VSN / VSKB / HO7RN-F Black Outdoor use
MSK / HF / HO5Z1Z1-F Black Indoor use
VSN / HF / HO7ZZ-F Black indoor and outdoor use

SNEP Mode P Linear High Quality Light - Figure 9

Step DIM motion sensor

SNEP Mode P Linear High Quality Light - Figure 10Switch 4 must be in the off positionSNEP Mode P Linear High Quality Light - Figure 11

SNEP Mode P Linear High Quality Light - Figure 12Luminaire and packing materials have to be disposed of according to local requirements.
Specifications subject to change without notice.
+358 (0)3 3404 111
[email protected]
purso.fi

Related Manuals

Leave a Comment