Eiswolf 2 AiO Water Cooling for Graphics Cards
Instruction Manual
Alphacool Eiswolf 2
Contents
Eiswolf 2 AiO Water Cooling for Graphics Cards
Safety instructions
https://www.alphacool.com/m/safety.pdf
Digital guide
https://www.alphacool.com/m/?acg=1022
Accessories
Mounting of the cooler
Mount the cooler using the mounting kit (B) as described in the manual of the Aurora graphics card cooler instructions.
Mount radiator and fans
Mount fans pushing.
Mount fans pulling.=
Wiring of the fans
Connection to the mainboard 
Three possibilities for the connection of the digital-RGB LED lighting
The digital RGB LEDs do not require more than 5V supply voltage.
Eiscontrol is not included in the accessories. 
Connection of the pump
Make sure that the voltage is set to 12V in the bios. This is not necessary for PWM connections.
Application note for quick connectors
One or two drops of coolant may leak out.
Example installation of the quick connectors
Need help?
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: [email protected]
https://www.alphacool.com
We care!